So I got some new old drives I wanted to test out - 3TB HGST HUS724030ALS640 for $18 / piece and these have ~39k hours. One drive showed a smart test error "Failed in second segment" with 0 hours, though the drive ran "fine" for 39,000 hours before I got it.
After I got the drive, I did a burn in of the drive : short -> long -> badblocks -> long smart tests and I did not see any more errors. So I deployed the drive and with the first scheduled short smart test, I noticed the Smart test error "Failed in second segment" again.
My questions-
How can 3 smart tests not get the error and the 4th gets it again? It is not the drive that worries me (plenty of spares), but that the burn-in tests did not catch this.
Does anybody know what this error really means? Just curious, I could not find it.
I noticed @Johnny Fartpants points out that this error isnot a real issue. (correction)
www.ixsystems.com
Full Smart
After I got the drive, I did a burn in of the drive : short -> long -> badblocks -> long smart tests and I did not see any more errors. So I deployed the drive and with the first scheduled short smart test, I noticed the Smart test error "Failed in second segment" again.
Code:
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Failed in second segment 2 39499 - [0x4 0x3e 0x3]
# 2 Background long Completed - 39442 - [- - -]
# 3 Background long Completed - 39378 - [- - -]
# 4 Background short Completed - 39371 - [- - -]
# 5 Background short Failed in second segment 2 0 - [0x4 0x3e 0x3]My questions-
How can 3 smart tests not get the error and the 4th gets it again? It is not the drive that worries me (plenty of spares), but that the burn-in tests did not catch this.
Does anybody know what this error really means? Just curious, I could not find it.
I noticed @Johnny Fartpants points out that this error is
SAS Smart self test results confusing.... Help needed
Hi all, I am currently in the process of building a new NAS and was doing the hard drive burning in procedure per our forum guide. Encountered some strange results and since this is my first SAS build I am at a loss wat to do... System is a Non ECC motherboard with the latest Freenas release...
www.ixsystems.com
Full Smart
Code:
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUS724030ALS640
Revision: A124
Compliance: SPC-4
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Logical block size: 512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca027c3f6f4
Serial number: P8KGSZHW
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed May 20 09:49:15 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 38 C
Drive Trip Temperature: 85 C
Manufactured in week 12 of year 2014
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 12
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 1660
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 2080889374769152
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 2830 0 0 2830 119345 173407.046 0
write: 0 0 0 0 13163 13281.664 0
verify: 64340 0 0 64340 682 1236.761 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Failed in second segment 2 39499 - [0x4 0x3e 0x3]
# 2 Background long Completed - 39442 - [- - -]
# 3 Background long Completed - 39378 - [- - -]
# 4 Background short Completed - 39371 - [- - -]
# 5 Background short Failed in second segment 2 0 - [0x4 0x3e 0x3]
Long (extended) Self-test duration: 29637 seconds [493.9 minutes]
Last edited:
