Hi
I had to replace something with a ram and after I replaced, suddenly one of my disks was having problems !!
Can a Ram replacement do something like this?
I connected the drive to another computer (windows) and checked with crystaldiskinfo and everything was fine. I have had these drives for less than a year (WD Rad 3TB)
I have these errors:
smart test ada1
And before that I had a problem that he even got the drive out of Pool but Narrally just have problems with drives that fail in encrypted pool so he didn't return it Finally I removed the pool from FreeNAS and did import it then the drive came back but with the errors shown above.
Is this a cable problem? Or the drive? I do not know what to do!!! help!
I had to replace something with a ram and after I replaced, suddenly one of my disks was having problems !!
Can a Ram replacement do something like this?
I connected the drive to another computer (windows) and checked with crystaldiskinfo and everything was fine. I have had these drives for less than a year (WD Rad 3TB)
I have these errors:
Code:
# zpool status pool: NAS state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub in progress since Fri Jan 24 17:45:42 2020 887G scanned at 424M/s, 262G issued at 125M/s, 6.43T total 0 repaired, 3.97% done, 0 days 14:22:41 to go config: NAME STATE READ WRITE CKSUM NAS DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 gptid/a79fe0a8-3c43-11e9-b8f1-e069952bbf5c.eli DEGRADED 0 0 71 too many errors gptid/a87765fc-3c43-11e9-b8f1-e069952bbf5c.eli ONLINE 0 0 0 gptid/a9463a8e-3c43-11e9-b8f1-e069952bbf5c.eli ONLINE 0 0 0 errors: No known data errors
smart test ada1
Code:
# smartctl -a /dev/ada1 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68N32N0 Serial Number: WD-WCC7K1FU80RF LU WWN Device Id: 5 0014ee 20fbb11e3 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jan 24 18:22:29 2020 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (31200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 332) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 156 021 Pre-fail Always - 7133 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 29 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7796 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 6 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 33 194 Temperature_Celsius 0x0022 116 104 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 198 000 Old_age Always - 13 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6364 - # 2 Short offline Completed without error 00% 4929 - # 3 Short offline Completed without error 00% 3443 - # 4 Extended offline Completed without error 00% 3218 - # 5 Short offline Completed without error 00% 1981 - # 6 Short offline Completed without error 00% 580 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
And before that I had a problem that he even got the drive out of Pool but Narrally just have problems with drives that fail in encrypted pool so he didn't return it Finally I removed the pool from FreeNAS and did import it then the drive came back but with the errors shown above.
Is this a cable problem? Or the drive? I do not know what to do!!! help!