Patrick Murray
Cadet
- Joined
- Jan 28, 2016
- Messages
- 4
Hi All,
I'm new to FreeNAS and have set up my first server with the following specs:
- Intel i5-3570k
- 4 x 4GB 1600MHz (non-EEC)
- 2 x 120GB SSD (boot + cache)
- 3 x 4TB WD Red NAS Drives
- 1 x 8TB SG Archive Drive
- 4 x 500GB 7200RPN Drives
- LSI RAID Controller/HBA
I've created a self signed certificate and have enabled SFTP. Unfortunately, I've only been able to achieve speeds as high as 25MB/s and as low as 5MB/s. Given my hardware and the fact that I'm on a gigabit network, I should be getting much higher transfer speeds. What type of modifications can I make to better my speeds?
Thanks,
Pat
I'm new to FreeNAS and have set up my first server with the following specs:
- Intel i5-3570k
- 4 x 4GB 1600MHz (non-EEC)
- 2 x 120GB SSD (boot + cache)
- 3 x 4TB WD Red NAS Drives
- 1 x 8TB SG Archive Drive
- 4 x 500GB 7200RPN Drives
- LSI RAID Controller/HBA
I've created a self signed certificate and have enabled SFTP. Unfortunately, I've only been able to achieve speeds as high as 25MB/s and as low as 5MB/s. Given my hardware and the fact that I'm on a gigabit network, I should be getting much higher transfer speeds. What type of modifications can I make to better my speeds?
Thanks,
Pat