I followed this guide: https://forums.freenas.org/index.ph...g-up-transmission-with-openvpn-and-pia.24566/
Instead of performing the above steps in a transmission jail, I did it my sabnzbd jail.
Everything seemed to work. However after restarting the jail, it appears that sabnzbd can't connect to the internet.
I downloaded some nzbs on my PC and uploaded them to sabnzbd's web interface, but they're not downloading anything.
I remoted into the sabnzbd jail and ran ifconfig and this was the output:
According to what I read, since the "tun1" interface shows up, at least some part of my configuration worked.
Can anyone explain why the jail might not be getting internet access and how I might fix that issue?
Also, assuming I can get it working, how can verify that the jail is using the VPN connection?
Thank you!
Instead of performing the above steps in a transmission jail, I did it my sabnzbd jail.
Everything seemed to work. However after restarting the jail, it appears that sabnzbd can't connect to the internet.
I downloaded some nzbs on my PC and uploaded them to sabnzbd's web interface, but they're not downloading anything.
I remoted into the sabnzbd jail and ran ifconfig and this was the output:
Code:
[root@sabnzbd_1 /]# ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> epair3b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:22:8b:00:0b:0b inet 192.168.0.8 netmask 0xffffff00 broadcast 192.168.0.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active tun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> inet X.X.X.6 --> X.X.X.5 netmask 0xffffffff nd6 options=1<PERFORMNUD> Opened by PID 27082 [root@sabnzbd_1 /]#
According to what I read, since the "tun1" interface shows up, at least some part of my configuration worked.
Can anyone explain why the jail might not be getting internet access and how I might fix that issue?
Also, assuming I can get it working, how can verify that the jail is using the VPN connection?
Thank you!