Hi, I am very new to TrueNas Scale. I used Proxmox before. I followed the official Guide to install wg-easy on my server, but something went wrong. What I have already tried:
- Access the web-panel with public ip (Tested if Port Forward and Firewall exception rules work) ––> they did!!
but I could only see and ping the server. The WAN and the LAN isn’t pingeable.
- under System Settins>advanced> I have set these values: net.ipv4.ip_forward = 1, net.ipv4.conf.all.src_valid_mark = 1
- In the Application I added entry for WG-DEVICE eno1 (after looking with ip a)
… Still doesn’t work.
It is a fresh install. Only thing I have changed are the ntp servers, location, set static ip.
Since I’m a noobie I don’t know which logs to provide.
Link to Official Guides:
TrueNas https://www.truenas.com/docs/scale/scaletutorials/apps/communityapps/installwgeasyapp/
Wireguard. https://github.com/wg-easy/wg-easy
- Access the web-panel with public ip (Tested if Port Forward and Firewall exception rules work) ––> they did!!
but I could only see and ping the server. The WAN and the LAN isn’t pingeable.
- under System Settins>advanced> I have set these values: net.ipv4.ip_forward = 1, net.ipv4.conf.all.src_valid_mark = 1
- In the Application I added entry for WG-DEVICE eno1 (after looking with ip a)
… Still doesn’t work.
It is a fresh install. Only thing I have changed are the ntp servers, location, set static ip.
Since I’m a noobie I don’t know which logs to provide.
Link to Official Guides:
TrueNas https://www.truenas.com/docs/scale/scaletutorials/apps/communityapps/installwgeasyapp/
Wireguard. https://github.com/wg-easy/wg-easy
