Thx a LOT for help!
Here we are...
[root@freenas ~]# zpool status
pool: Volume1
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 159G in 0 days 03:54:21 with 0 errors on Sat Mar 5 13:48
:27 2022
config:
NAME STATE READ WRITE CKS
UM
Volume1 DEGRADED 0 0
0
mirror-0 DEGRADED 0 0
0
gptid/eb0192da-0536-11e4-bcda-f46d045fb8XX ONLINE 0 0
0
17712574894611099577 UNAVAIL 0 0
0 was /dev/gptid/eb986d1e-0536-11e4-bcda-f46d045fb8XX
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:08:37 with 0 errors on Tue Mar 29 03:53:38
2022
config:
NAME STATE READ WRITE CKS
UM
freenas-boot ONLINE 0 0
0
mirror-0 ONLINE 0 0
0
gptid/e3aae27d-9309-11e7-b6c3-54a0508006XX ONLINE 0 0
0
da0p2 ONLINE 0 0
0
errors: No known data errors
[root@freenas ~]#
http://illumos.org/msg/ZFS-8000-2Q tells me:
a.)
Should i perform:
action: Attach the missing device and online it using 'zpool online'.
b.)
Determine which device failed to open by looking for a FAULTED device with an additional 'cannot open' message
->> There is none marked with Faulted or Message "cannot open"
c.)
Or should i perform this command:
If the device has been replaced by another disk in the same physical slot, then the device can be replaced using a single argument to the 'zpool replace' command:
# zpool replace test ada0 ? -- ((S2H7JXOD10032..))
d.)
What exactly does this mean:
"gptid/eb0192da-0536-11e4-bcda-f46d045fb8XX"
"gptid/e3aae27d-9309-11e7-b6c3-54a0508006XX "
" was /dev/gptid/eb986d1e-0536-11e4-bcda-f46d045fb8XX"
?
e.) OK, that makes it a bit clearer, not the Ethernet Cable.. will try and replace all SATA cables, but i had no broken SATA cable so far in
Pc's...? Problem could be that i have only 2 SATA Ports on my Mainboard?
Oh seems i am lucky:
SATA II Anschlüsse 4
so i could maybe move both Hard Disk Serial ATA cables to another Port.
f.)
1.)I tried first to boot only with one of the old Hard Disks previous inside NAS only, was able to perform that and get the Web Access
2.)I then tried the same with the other old Hard Disk previous inside NAS, NO! Access to Web Access!
3.)Afterwards tried with one Old Hard Disk and one replaced used Hard Disk - was able to get Web Access.
ok, maybe i waited to little Time on 2.) - Or is no Web Access the same as "Disk damaged"?
Here we are...
[root@freenas ~]# zpool status
pool: Volume1
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 159G in 0 days 03:54:21 with 0 errors on Sat Mar 5 13:48
:27 2022
config:
NAME STATE READ WRITE CKS
UM
Volume1 DEGRADED 0 0
0
mirror-0 DEGRADED 0 0
0
gptid/eb0192da-0536-11e4-bcda-f46d045fb8XX ONLINE 0 0
0
17712574894611099577 UNAVAIL 0 0
0 was /dev/gptid/eb986d1e-0536-11e4-bcda-f46d045fb8XX
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:08:37 with 0 errors on Tue Mar 29 03:53:38
2022
config:
NAME STATE READ WRITE CKS
UM
freenas-boot ONLINE 0 0
0
mirror-0 ONLINE 0 0
0
gptid/e3aae27d-9309-11e7-b6c3-54a0508006XX ONLINE 0 0
0
da0p2 ONLINE 0 0
0
errors: No known data errors
[root@freenas ~]#
http://illumos.org/msg/ZFS-8000-2Q tells me:
a.)
Should i perform:
action: Attach the missing device and online it using 'zpool online'.
b.)
Determine which device failed to open by looking for a FAULTED device with an additional 'cannot open' message
->> There is none marked with Faulted or Message "cannot open"
c.)
Or should i perform this command:
If the device has been replaced by another disk in the same physical slot, then the device can be replaced using a single argument to the 'zpool replace' command:
# zpool replace test ada0 ? -- ((S2H7JXOD10032..))
d.)
What exactly does this mean:
"gptid/eb0192da-0536-11e4-bcda-f46d045fb8XX"
"gptid/e3aae27d-9309-11e7-b6c3-54a0508006XX "
" was /dev/gptid/eb986d1e-0536-11e4-bcda-f46d045fb8XX"
?
e.) OK, that makes it a bit clearer, not the Ethernet Cable.. will try and replace all SATA cables, but i had no broken SATA cable so far in
Pc's...? Problem could be that i have only 2 SATA Ports on my Mainboard?
Oh seems i am lucky:
SATA II Anschlüsse 4
so i could maybe move both Hard Disk Serial ATA cables to another Port.
f.)
1.)I tried first to boot only with one of the old Hard Disks previous inside NAS only, was able to perform that and get the Web Access
2.)I then tried the same with the other old Hard Disk previous inside NAS, NO! Access to Web Access!
3.)Afterwards tried with one Old Hard Disk and one replaced used Hard Disk - was able to get Web Access.
ok, maybe i waited to little Time on 2.) - Or is no Web Access the same as "Disk damaged"?