Useful Commands

Bidule0hm

Server Electronics Sorcerer
Joined
Aug 5, 2013
Messages
3,710
I just wanted to share my list of useful commands with everyone ;)

Please note that you're the only one responsible of what you do in the CLI so don't blame me if you mess your system.

Feel free to suggest me some commands (by private message to avoid cluttering the thread) ;)

Also I want to say thanks to BigDave for providing some of the commands :)



ZFS
Code:
zpool status -v #shows zpool status infos

zpool iostat 1 #shows IOps and R/W bandwidth every second

zfs list -t snapshot #lists all the snapshots, add | grep "" to filter

arc_summary.py #shows ARC stats

arcstat.py #shows ARC stats

zdb -C your_pool_name | grep ashift #shows the ashift value




SMART
Code:
smartctl -h #shows smart control help, lots of commands examples

smartctl -a /dev/daX #shows all smart attributes

smartctl -A /dev/daX #same as -a but without vendor infos, last test infos, ...

smartctl -l selftest /dev/daX #shows result of last smart test

smartctl -l scttemp /dev/daX #shows the temperatures history

smartctl -t long /dev/daX #executes a long test (replace "long" by "short" for a short test)




HDD
Code:
glabel status  #shows gptids and devices names

gstat -f daX -I 1000ms #shows IOps and R/W bandwidth every second

iostat daX #shows IOps and R/W bandwidth




HBA
Code:
dmesg | grep mps #used to check FW and driver versions on HBA cards using the mps driver




UPS
Code:
upsc ups #shows all ups attributes (change "ups" with your ups name)




Misc
Code:
kldload ipmi.ko #loads ipmitool
ipmitool sensor #shows all ipmi sensors values

systat -vm #shows system infos (cpu load, ram usage, drives I/O, ...)

dmidecode | more #shows all hardware bios infos

cat /var/log/messages | more #shows the log (same as in the GUI footer)

freenas-debug -h more /var/tmp/fndebug #shows all debug infos

camcontrol devlist #shows all devices

usbconfig #shows all usb devices




Burn-in/Benchmark
Code:
dd if=/dev/zero of=/mnt/tank/tmp.zero bs=2048k count=50k #disable shares and compression for the test!!!
dd if=/mnt/tank/tmp.zero of=/dev/null bs=2048k count=50k #disable shares and compression for the test!!! don't forget to delete tmp.zero after

diskinfo -t daX #test seek and transfer times

for i in 1 2 3 4; do while : ; do : ; done & done #cpu burn test for 4 threads
 
Last edited:

DrKK

FreeNAS Generalissimo
Joined
Oct 15, 2013
Messages
3,630
Very useful sir. I recommend the mods @jkh @cyberjock etc move it to some permanent/sticky status and/or location.
 

Bidule0hm

Server Electronics Sorcerer
Joined
Aug 5, 2013
Messages
3,710
Many thanks ;)
 

TinTIn

Contributor
Joined
Feb 9, 2015
Messages
142
Very helpful, thankyou


Sent from my iPhone using Tapatalk
 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Code:
smartctl -A /dev/adaX

Useful if you only want to check the SMART attributes, without drive information, SMART test log and other less-interesting info.
 

Snow

Patron
Joined
Aug 1, 2014
Messages
309
Are the Parameters for Freebsd - mv - Move commands all the same for FreeNas as they are for Freebsd?
 

Snow

Patron
Joined
Aug 1, 2014
Messages
309
Thanks
 

socra

Dabbler
Joined
Nov 3, 2018
Messages
34
I just wanted to share my list of useful commands with everyone ;)

Please note that you're the only one responsible of what you do in the CLI so don't blame me if you mess your system.

Feel free to suggest me some commands (by private message to avoid cluttering the thread) ;)

Also I want to say thanks to BigDave for providing some of the commands :)



ZFS
Code:
zdb -C your_pool_name | grep ashift #shows the ashift value

Should this code not be changed to

zdb -U /data/zfs/zpool.cache | grep ashift ?
 

Grunt 031

Cadet
Joined
Apr 4, 2021
Messages
3
Thank this great.
 
Top