It is sad that i have to use upsmon on pfsense (or another machine) to be able to get a graphical display of the UPS status/config on my freenas box
without having to go to the command line. the ups reporting provides minimal value as-is.
Wouldn't it make sense to have a graphical status page that provides the below info and any configurable parameters as well.
without having to go to the command line. the ups reporting provides minimal value as-is.
Wouldn't it make sense to have a graphical status page that provides the below info and any configurable parameters as well.
| Variable | Value |
| battery.charge | 100 |
| battery.charge.low | 10 |
| battery.charge.warning | 50 |
| battery.runtime | 4620 |
| battery.runtime.low | 120 |
| battery.type | PbAc |
| battery.voltage | 27.2 |
| battery.voltage.nominal | 24.0 |
| device.mfr | American Power Conversion |
| device.model | Smart-UPS C 1000 |
| device.serial | 3S1609X0xxxxx |
| device.type | ups |
| driver.flag.pollonly | enabled |
| driver.name | usbhid-ups |
| driver.parameter.pollfreq | 30 |
| driver.parameter.pollinterval | 2 |
| driver.parameter.port | auto |
| driver.parameter.synchronous | no |
| driver.version | 2.7.4 |
| driver.version.data | APC HID 0.96 |
| driver.version.internal | 0.41 |
| ups.beeper.status | disabled |
| ups.delay.shutdown | 20 |
| ups.firmware | UPS 10.0 / ID=1005 |
| ups.mfr | American Power Conversion |
| ups.mfr.date | 2016/03/04 |
| ups.model | Smart-UPS C 1000 |
| ups.productid | 0003 |
| ups.serial | 3S1609X0xxxx |
| ups.status | OL |
| ups.timer.reboot | -1 |
| ups.timer.shutdown | -1 |
| ups.vendorid | 051d |
