lastcmaster
Dabbler
- Joined
- May 5, 2013
- Messages
- 20
Trying to upgrade one machine using the http://download.freenas.org/9.3/BETA/x64/FreeNAS-9.3-BETA-aaa86f0-x64.GUI_Upgrade.txz file, I end up in a constant reboot. Going back to the 9.2.1 image by selecting the F1 nanoBSD image.
The errors looked like misisng /rescue/sh when trampline.rc was run. It also looks like the boo0cfg has not set the default boot image to the new image but still points to F1.
Anyhow, this is the s2a slice:
<pre>
[root@balder] /mnt/system/home/admglz# mount /dev/ufs/FreeNASs
FreeNASs1a% FreeNASs3% FreeNASs4%
[root@balder] /mnt/system/home/admglz# mount /dev/da0
da0% da0s1% da0s1a% da0s2% da0s2a% da0s3% da0s4%
[root@balder] /mnt/system/home/admglz# mount /dev/da0s2a /tmp/mnt
[root@balder] /mnt/system/home/admglz# cd /tmp/mnt
[root@balder] /tmp/mnt# ls
./ .snap/ gui-install-environment.tar
../ boot/ gui-packages.tar
[root@balder] /tmp/mnt# ls boot/
./ brand.4th frames.4th loader.help modules/ userboot.so
../ cdboot gptboot loader.rc pmbr version.4th
beastie.4th check-password.4th gptzfsboot loader.rc.local pmbr-datadisk zfs/
boot color.4th grub/ mbr pxeboot zfsboot
boot0 defaults/ kernel/ menu-commands.4th screen.4th zfsloader*
boot0sio delay.4th loader* menu.4th shortcuts.4th
boot1 device.hints loader.4th menu.rc support.4th
boot2 firmware/ loader.conf menusets.4th trampoline.ufs.gz
</pre>
and I don't see any /rescue there. Should there be?
Sorry about the minimal information but I find no boot log or console log and I lost the information of the screen buffer.
The errors looked like misisng /rescue/sh when trampline.rc was run. It also looks like the boo0cfg has not set the default boot image to the new image but still points to F1.
Anyhow, this is the s2a slice:
<pre>
[root@balder] /mnt/system/home/admglz# mount /dev/ufs/FreeNASs
FreeNASs1a% FreeNASs3% FreeNASs4%
[root@balder] /mnt/system/home/admglz# mount /dev/da0
da0% da0s1% da0s1a% da0s2% da0s2a% da0s3% da0s4%
[root@balder] /mnt/system/home/admglz# mount /dev/da0s2a /tmp/mnt
[root@balder] /mnt/system/home/admglz# cd /tmp/mnt
[root@balder] /tmp/mnt# ls
./ .snap/ gui-install-environment.tar
../ boot/ gui-packages.tar
[root@balder] /tmp/mnt# ls boot/
./ brand.4th frames.4th loader.help modules/ userboot.so
../ cdboot gptboot loader.rc pmbr version.4th
beastie.4th check-password.4th gptzfsboot loader.rc.local pmbr-datadisk zfs/
boot color.4th grub/ mbr pxeboot zfsboot
boot0 defaults/ kernel/ menu-commands.4th screen.4th zfsloader*
boot0sio delay.4th loader* menu.4th shortcuts.4th
boot1 device.hints loader.4th menu.rc support.4th
boot2 firmware/ loader.conf menusets.4th trampoline.ufs.gz
</pre>
and I don't see any /rescue there. Should there be?
Sorry about the minimal information but I find no boot log or console log and I lost the information of the screen buffer.