Register for the iXsystems Community to get an ad-free experience

SOLVED Updated to TrueNAS-SCALE-22.02.0.1 but got Critical Alert

Western Digital Drives - The Preferred Drives of FreeNAS and TrueNAS CORE

TooMuchData

Contributor
Joined
Jan 4, 2015
Messages
183
Got this CRITICAL alert:

Failed to sync OFFICIAL catalog: [EFAULT] Failed to clone 'https://github.com/truenas/charts.git' repository at '/mnt/pond/ix-applications/catalogs/github_com_truenas_charts_git_master' destination: Cmd('git') failed due to: exit code(128) cmdline: git clone -v https://github.com/truenas/charts.git /mnt/pond/ix-applications/catalogs/github_com_truenas_charts_git_master stderr: 'Cloning into '/mnt/pond/ix-applications/catalogs/github_com_truenas_charts_git_master'... fatal: unable to access 'https://github.com/truenas/charts.git/': Failed to connect to github.com port 443: No route to host '​
2022-03-23 07:14:20 (America/New_York)​

Now what?
 

Kris Moore

SVP of Engineering
Administrator
Moderator
iXsystems
Joined
Nov 12, 2015
Messages
1,190
That means it couldn't reach out to github.com. Check your DNS / default gateway and see if you have a valid outbound network connection...
 

stavros-k

Patron
Joined
Dec 26, 2020
Messages
231
Well github is being a snowflake the last couple of days.
(Seems it's functional now)
Try syncing catalogs again from Apps > Manage Catalogs > Refresh All, If you still have issues, then check what Kris said.
 

TooMuchData

Contributor
Joined
Jan 4, 2015
Messages
183
Thanks, Chris.
SSH to Truenas3, my Scale system. Dig github.com, get 140.82.112.4.
root@truenas3[~]# ping github.com
PING github.com (140.82.112.4) 56(84) bytes of data
From truenas3.alperin.lan (192.168.0.xx) icmp_seq=1 Destination Host Unreachable
Another Debian system connected to the same router has no trouble pinging github.com or its IPv4 address.
Same for my Truenas Core systems.

Turns out that my br0 address was the problem. When I created it to resolve some virtual machine issues, I gave it a new fixed IP. That worked, it seemed, for all my other issues, but created this one. Removed DHCP and IP from en0, the only bridge member, and gave that fixed IP address to br0. All works now.
 
Top