lomilomi
Dabbler
- Joined
- Jan 30, 2016
- Messages
- 22
I've been using Freenas for over a year with no major issues. Slowly learning the ins and outs. I'm currently in a state of fear.
On Tuesday morning kicked off the update for the latest stable release. Upon my return in the evening the WebGui and SSH port weren't accessible. Jails were non-responsive as well. Connected a monitor to my server and saw that the new boot partition was failing to load. Reverted back to the previous 4.14 version and was able to get to a shell and the boot partition repaired an error that occured. At this point no jails were running. More distressingly all the datasets have 0 data in them as well. df reports the capacity at 0% as well.
Thanks in advance for any help or support.
Richard
zpool status shows the pools are all online.
Here are the boot messages:
On Tuesday morning kicked off the update for the latest stable release. Upon my return in the evening the WebGui and SSH port weren't accessible. Jails were non-responsive as well. Connected a monitor to my server and saw that the new boot partition was failing to load. Reverted back to the previous 4.14 version and was able to get to a shell and the boot partition repaired an error that occured. At this point no jails were running. More distressingly all the datasets have 0 data in them as well. df reports the capacity at 0% as well.
Thanks in advance for any help or support.
Richard
Code:
df /mnt/main Filesystem 1K-blocks Used Avail Capacity Mounted on main 1882401316 112 1882401204 0% /mnt/main
zpool status shows the pools are all online.
Code:
~# zpool status main
pool: main
state: ONLINE
scan: scrub repaired 0 in 6h26m with 0 errors on Fri Apr 15 08:26:33 2016
config:
NAME STATE READ WRITE CKSUM
main ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/d78e99e1-80ce-11e4-86c0-bc5ff4653672 ONLINE 0 0 0
gptid/d7e0fe28-80ce-11e4-86c0-bc5ff4653672 ONLINE 0 0 0
errors: No known data errors
Here are the boot messages:
Code:
~# dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 1b72f49(HEAD): Wed Apr 13 23:35:10 PDT 2016
root@build.ixsystems.com:/tank/home/nightlies/CVE910/_BE/objs/tank/home/nightlies/CVE910/_BE/trueos/sys/FreeNAS.amd64 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (3292.60-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 9384755200 (8950 MB)
avail memory = 8157331456 (7779 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
random: <Software, Yarrow> initialized
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7c00000-0xf7c3ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge desktop GT1 IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d18000-0xf7d183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: bc:5f:f4:65:36:72
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d16000-0xf7d167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ichwd0: <Intel Panther Point watchdog timer> on isa0
wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <Lexar> at usbus2
umass0: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 3> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:7:0:-1: Attached to scbus7
ugen1.3: <Kingston> at usbus1
umass1: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.00, addr 3> on usbus1
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:8:1:-1: Attached to scbus8
ugen2.4: <Lexar> at usbus2
umass2: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 4> on usbus2
umass2: SCSI over Bulk-Only; quirks = 0x8100
umass2:9:2:-1: Attached to scbus9
ugen1.4: <StarTech.com> at usbus1
umass3: <StarTech.com S2510SM12U33, class 0/0, rev 2.10/1.00, addr 4> on usbus1
umass3: SCSI over Bulk-Only; quirks = 0x0100
umass3:10:3:-1: Attached to scbus10
ugen1.5: <Lexar> at usbus1
umass4: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 5> on usbus1
umass4: SCSI over Bulk-Only; quirks = 0x8100
umass4:11:4:-1: Attached to scbus11
ugen1.6: <Lexar> at usbus1
umass5: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 6> on usbus1
umass5: SCSI over Bulk-Only; quirks = 0x8100
umass5:12:5:-1: Attached to scbus12
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST2000NM0011 SN03> ATA8-ACS SATA 3.x device
ada0: Serial Number Z1P68F9S
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EURS-73TLHY0 80.00A80> ACS-2 ATA SATA 2.x device
ada1: Serial Number WD-WCC4M2003580
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD10EZEX-60ZF5A0 80.00A80> ACS-2 ATA SATA 3.x device
ada2: Serial Number WD-WCC1S8141130
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD10EZEX-22BN5A0 01.01A01> ACS-2 ATA SATA 3.x device
ada3: Serial Number WD-WCC3F7VNRNSK
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ada3: Previously was known as ad10
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <WDC WD40EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device
ada4: Serial Number WD-WCC4EPPLUDT9
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 3815447MB (7814037168 512 byte sectors)
ada4: quirks=0x1<4K>
ada4: Previously was known as ad12
ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
ada5: <WDC WD40EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device
ada5: Serial Number WD-WCC4E5ESC9P7
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 3815447MB (7814037168 512 byte sectors)
ada5: quirks=0x1<4K>
ada5: Previously was known as ad14
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device
da0: Serial Number AA042T3SUJM90N2V
da0: 40.000MB/s transfers
da0: 15276MB (31285248 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da2 at umass-sim2 bus 2 scbus9 target 0 lun 0
da2: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device
da2: Serial Number AA0FBNHGRGW06A74
da2: 40.000MB/s transfers
da2: 15276MB (31285248 512 byte sectors)
da2: quirks=0x2<NO_6_BYTE>
da1 at umass-sim1 bus 1 scbus8 target 0 lun 0
da1: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da1: Serial Number 08606E6D4080BF11470D229A
da1: 40.000MB/s transfers
da1: 15004MB (30728832 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
da3 at umass-sim3 bus 3 scbus10 target 0 lun 0
da3: <ASMT 2105 0> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number 1401146307F5
da3: 40.000MB/s transfers
da3: 152627MB (312581808 512 byte sectors)
da3: quirks=0x2<NO_6_BYTE>
da4 at umass-sim4 bus 4 scbus11 target 0 lun 0
da4: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device
da4: Serial Number AA48RE5REYZ60WXX
da4: 40.000MB/s transfers
da4: 15276MB (31285248 512 byte sectors)
da4: quirks=0x2<NO_6_BYTE>
da5 at umass-sim5 bus 5 scbus12 target 0 lun 0
da5: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device
da5: Serial Number AA04KYDUINF7VYRS
da5: 40.000MB/s transfers
da5: 15276MB (31285248 512 byte sectors)
da5: quirks=0x2<NO_6_BYTE>
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1646298336 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/9.10-STABLE-201604140622 []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
re0: link state changed to UP
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
re0: link state changed to DOWN
re0: link state changed to UP
vboxdrv: fAsync=0 offMin=0x244 offMax=0xe34
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada2p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada4p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device da3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
