m1dn1ghs0n
Cadet
- Joined
- Dec 6, 2020
- Messages
- 2
I looked through the forums already and didn't come across any relative posts. I am a Truenas noob attempting to install Truenas onto an NVME (boot) drive so that I can set up my 4x14TB Seagate hdd pool. I am running it from an old pc build of said specs: Asus Z170 Pro mobo, Intel Core i7 6700k, 64GB G. Skill 3600MHz RAM, Generic (repurposed) 512GB SK Hynix NVME ssd, and a 240 GB Intel 530 SSD to go along with my 4 Seagate spinning rust. I have tried making a bootable USB with 3 USB drives (Sandisk 16GB USB2.0, PNY 128GB USB3.1, and Sandisk USB3.0 256GB). I've used Rufus 3.13 as well as Balena Etcher for each one so far. Each time I attampt to boot into the USB media it is successfull getting to the "Console Setup" screen. I am able to use my keyboard and mouse in the time before it boots into the USB but once it does, the setup no longer recognizes my keyboard or mouse and I cannot click the option 1) Install/Upgrade. I have tried messing with several bios settings to no avail. I am getting extremely frustrated an cannot seem to find much relevent information regarding bootable USB install issues for Truenas Core. I have never had trouble creating a bootable usb in the past or installing on said system. I have also tried different USB ports for all devices 2.0/3.0/3.1 Front and back. Let me know if there is any other information that would be useful for diagnosing this situation.
Thanks,
J
Thanks,
J