Hi guys,
I have been spending the last few days searching and trying everything to install FreeNAS.
First i tried to install it using two usb sticks. No matter what i did or tried, it always failed with mount error 19. Tried different slots and delaying the installers boot squence. Nothing worked.
I managed to get a spare dvd drive and tried to install it from a dvd to a usb stick, no luck. This time though i could get to the installer, but the usb drive did not show up when picking where to install to. It shows up fine in bios.
Am i stuck having to install it on a hdd or is there something i could try?
Things ive tried:
using "set debug.acpi.disabled="hostres"" in the boot squence
using "set kFreeBSD.kern.cam.boot_delay="50000"" in the boot squence
using usb 3.0 and 2.0 stick in usb 2.0 port
disable "xhci hand-off" in bios
Hardware:
MSI B150M Mortar, Socket-1151
Intel Core i5-6400 Skylake
HyperX Fury DDR4 2133MHz 16GB kit
WD Red 4TB NAS Harddrive
usb 3.0 sandisk 16gb
usb 2.0 sandisk 32gb
I have been spending the last few days searching and trying everything to install FreeNAS.
First i tried to install it using two usb sticks. No matter what i did or tried, it always failed with mount error 19. Tried different slots and delaying the installers boot squence. Nothing worked.
I managed to get a spare dvd drive and tried to install it from a dvd to a usb stick, no luck. This time though i could get to the installer, but the usb drive did not show up when picking where to install to. It shows up fine in bios.
Am i stuck having to install it on a hdd or is there something i could try?
Things ive tried:
using "set debug.acpi.disabled="hostres"" in the boot squence
using "set kFreeBSD.kern.cam.boot_delay="50000"" in the boot squence
using usb 3.0 and 2.0 stick in usb 2.0 port
disable "xhci hand-off" in bios
Hardware:
MSI B150M Mortar, Socket-1151
Intel Core i5-6400 Skylake
HyperX Fury DDR4 2133MHz 16GB kit
WD Red 4TB NAS Harddrive
usb 3.0 sandisk 16gb
usb 2.0 sandisk 32gb