Sparx
Contributor
- Joined
- Apr 18, 2017
- Messages
- 107
Hi!
I just upgraded to Truenas Scale from a working Core setup. The issue I have is that I want to Passthru an LSI 9380-8e (Connected to a JBOD full of ext3 devices with chia mining) to a virtual machine. I couldnt get the ext3 drives mounted as drives so I just passed them in to a VM instead.
But no PCIe device shows up to pass on in scale. IOMMU is enabled. I do believe the virtualization settings in BIOS are set correctly also since it was working before. But im checking it at the moment. Since there are a lot of drives connected to this system the bios setup is slow to get to. =)
Hardware Supermicro X11SPM-TF with Gold 6248 and 192GB RAM. LSI 9380-8e device at adress 17.00.0.
I just upgraded to Truenas Scale from a working Core setup. The issue I have is that I want to Passthru an LSI 9380-8e (Connected to a JBOD full of ext3 devices with chia mining) to a virtual machine. I couldnt get the ext3 drives mounted as drives so I just passed them in to a VM instead.
But no PCIe device shows up to pass on in scale. IOMMU is enabled. I do believe the virtualization settings in BIOS are set correctly also since it was working before. But im checking it at the moment. Since there are a lot of drives connected to this system the bios setup is slow to get to. =)
Hardware Supermicro X11SPM-TF with Gold 6248 and 192GB RAM. LSI 9380-8e device at adress 17.00.0.
root@freenas:/mnt# dmesg | grep -e DMAR -e IOMMU
[ 0.019417] ACPI: DMAR 0x000000005B784CE8 000148 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
[ 0.019469] ACPI: Reserving DMAR table memory at [mem 0x5b784ce8-0x5b784e2f]
[ 0.030549] DMAR: IOMMU enabled
[ 1.817783] DMAR: Host address width 46
Last edited: