Dopamin3
Dabbler
- Joined
- Aug 18, 2017
- Messages
- 46
If I power on my system from a powered off state, it works fine. If the system is running and I try to reboot it- regardless of through the webui or a simple reboot ssh command, the system does not come back online.
It's sitting on a screen that just spams "waiting for da da" over and over and over again. Once I power the system off, turn it back on, the system boots and works great.
Full specs of the system are in my signature, but I'll post them here too:
Ryzen 2700X | AsRock X370 Taichi (BIOS 6.40) | 4 x 32GB Nemix Unbuffered ECC 2666MHz | Visiontek HD 5450 1GB | Chelsio T520-SO-CR 10GbE NIC | Samsung MZVLW128HEGR-00000 NVME Boot Drive | zpool tank: 7x Toshiba X300 5TB and 3x Toshiba MG04ACA600E 6TB in RAIDZ3 | zpool crucial: 2x Crucial MX500 2TB SSD in RAIDZ1 | LSI 9201-16i IT Mode HBA | SuperMicro 933T-R760B 3U 15 Bay w/ Triple PSU | TrueNAS Core 13.0-U4
I think if it's waiting for da da, that means my LSI HBA didn't initialize properly? Maybe I need to change a BIOS setting or something? All my hard drives and two ssds are devices da0 - da11. Any input would be appreciated.
It's sitting on a screen that just spams "waiting for da da" over and over and over again. Once I power the system off, turn it back on, the system boots and works great.
Full specs of the system are in my signature, but I'll post them here too:
Ryzen 2700X | AsRock X370 Taichi (BIOS 6.40) | 4 x 32GB Nemix Unbuffered ECC 2666MHz | Visiontek HD 5450 1GB | Chelsio T520-SO-CR 10GbE NIC | Samsung MZVLW128HEGR-00000 NVME Boot Drive | zpool tank: 7x Toshiba X300 5TB and 3x Toshiba MG04ACA600E 6TB in RAIDZ3 | zpool crucial: 2x Crucial MX500 2TB SSD in RAIDZ1 | LSI 9201-16i IT Mode HBA | SuperMicro 933T-R760B 3U 15 Bay w/ Triple PSU | TrueNAS Core 13.0-U4
I think if it's waiting for da da, that means my LSI HBA didn't initialize properly? Maybe I need to change a BIOS setting or something? All my hard drives and two ssds are devices da0 - da11. Any input would be appreciated.