edmondtan3
Cadet
- Joined
- Oct 30, 2020
- Messages
- 4
Hi All,
I have just upgraded from Freenas 11.3 to TrueNas-12.0-release and then the pool showing unhealthy. I'm not sure what happen and googles the error code, but showing me anything. I hope somebody can help me.
Thanks
Regards
Edmond
I have just upgraded from Freenas 11.3 to TrueNas-12.0-release and then the pool showing unhealthy. I'm not sure what happen and googles the error code, but showing me anything. I hope somebody can help me.
Code:
root@freenas[~]# zpool status -v pool: Full_Drive state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 13.8M in 01:44:49 with 1 errors on Sun Oct 4 01:44:50 2020 config: NAME STATE READ WRITE CKSUM Full_Drive ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/13fce8d8-d32b-11e9-844b-408d5cbbd96f ONLINE 0 0 0 gptid/15fbd7d2-d32b-11e9-844b-408d5cbbd96f ONLINE 0 0 0 gptid/180c2f36-d32b-11e9-844b-408d5cbbd96f ONLINE 0 0 0 gptid/191f21b6-d32b-11e9-844b-408d5cbbd96f ONLINE 0 0 0 gptid/1b1d10f9-d32b-11e9-844b-408d5cbbd96f ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: <0x8d0>:<0x304e3> pool: freenas-boot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub repaired 0B in 00:00:50 with 0 errors on Mon Oct 26 03:45:50 2020 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 ada0p2 ONLINE 0 0 0
Thanks
Regards
Edmond