SMART test results gui shows spinning circle

[Braveheart777]

Hi Experts!

Newbie here. I'm excited! I finally got my server built and TrueNAS-12.0-U3 installed. I'm not migrating any data until I learn and know that all is stable. So far, all is good except:

Problem: I have run both long and short SMART tests on all of my drives. In the GUI, when I go to see the SMART results under Storage-Disks, all I ever see is a blue circle continuously spinning. In the shell, I can run the smartctl commands and see the results fine.

Troubleshooting:
Tried multiple browsers: ie11, edge, FF, and Chrome. Also tried the various defaults with no plugins in those browsers and clearing caches. = no change
Tried different computers as well = no change
Rebooted server = no change
Reset defaults/config = no change
Install media was verified/checksum-ed

Any help is much appreciated!
Thanks,
Newbie :)

 

[Forza]

I have the exact same issue https://www.truenas.com/community/threads/smart-monitoring-screen-stuck-on-loading-circle.92965/

 

[Braveheart777]

I have the exact same issue https://www.truenas.com/community/threads/smart-monitoring-screen-stuck-on-loading-circle.92965/

Now I don't feel like it my "newbie"-ness causing the problem. I did search for known issues but didn't seem to find any.

 

[Bill_Lyddon]

I have the exact same issue on both of my systems (one Intel, the other AMD).
Both display the spinning circle under 12.0-U3.
Both display SMART test results as expected with no problems under 12.0-U2 and earlier.

 

[Braveheart777]

I have the exact same issue on both of my systems (one Intel, the other AMD).
Both display the spinning circle under 12.0-U3.
Both display SMART test results as expected with no problems under 12.0-U2 and earlier.

Perhaps this is a new bug or known issue I have not located yet when searching?

 

[winnielinnie]

I filed a bug report for this against 12.0-U3: https://jira.ixsystems.com/browse/NAS-110505

 

[Braveheart777]

Just an FYI. Updates were applied today. Issue is still there after the latest update.

 

[Forza]

Just an FYI. Updates were applied today. Issue is still there after the latest update.

Thanks for confirming this.

 

[edhall1044]

If you can't log in through the GUI, how are you supposed to install updates?

 

[winnielinnie]

Just an FYI. Updates were applied today. Issue is still there after the latest update.

You installed 12.0-U4? I don't believe it was released yet?

 

[base04__]

and here i thought it was because i messed up my lsi hba. i do however get temp reads on some of my drives from the graphs.
running 12.0-U3.1