obsodien
Dabbler
- Joined
- May 4, 2014
- Messages
- 41
Built a new server primarily for the use of being a media server. Put all the hardware together and successfully install FreeNAS 11.1-U2. I went ahead and created a "collection" ZVOL as well as a "movies" ZVOL within. i researched the best method of transferring the files over (2.7 TB) and RSYNC seemed to be the winner.... I set up RSYNC module and RSYNC task on the server (old freenas) and just the RSYNC task on the client (new freenas). left the settings at default for both sides...with exception of preserve permissions. that i checked marked.
Once RSYBC completed... 20hrs later.. i made sure that the permissions were identical on both systems user:Media group:Media..
installed EMBY, assigned folders and IP address and started plugin in.
got into web interface to configure EMBY and set up folder to point to path of collection and destination as /media.
when i go to refresh nothing happens and below is the LOG from start to end...
2018-03-01 19:29:01.977 Info TaskManager: Executing Scan media library
2018-03-01 19:29:01.977 Info HttpServer: HTTP Response 204 to 10.0.0.13. Time: 2ms. http://10.0.0.225:80...981f89aa78b030f
2018-03-01 19:29:01.978 Info App: Validating media library
2018-03-01 19:29:01.981 Info HttpServer: HTTP GET http://10.0.0.225:80...?IsEnabled=true. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/64.0.3282.186 Safari/537.36
2018-03-01 19:29:01.983 Info HttpServer: HTTP Response 200 to 10.0.0.13. Time: 3ms. http://10.0.0.225:80...?IsEnabled=true
2018-03-01 19:29:02.007 Info TaskManager: Scan media library Completed after 0 minute(s) and 0 seconds
New system:
MB: SUPERMICRO MBD-X10SDV-TLN4F-O (overkill, i know)
RAM: Crucial CT2K8G4RFS424A 16GB Kit (2 x 8GB) DDR4-2400 RDIMM
HD: 5 x 3TB in RAIDZ1
Once RSYBC completed... 20hrs later.. i made sure that the permissions were identical on both systems user:Media group:Media..
installed EMBY, assigned folders and IP address and started plugin in.
got into web interface to configure EMBY and set up folder to point to path of collection and destination as /media.
when i go to refresh nothing happens and below is the LOG from start to end...
2018-03-01 19:29:01.977 Info TaskManager: Executing Scan media library
2018-03-01 19:29:01.977 Info HttpServer: HTTP Response 204 to 10.0.0.13. Time: 2ms. http://10.0.0.225:80...981f89aa78b030f
2018-03-01 19:29:01.978 Info App: Validating media library
2018-03-01 19:29:01.981 Info HttpServer: HTTP GET http://10.0.0.225:80...?IsEnabled=true. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/64.0.3282.186 Safari/537.36
2018-03-01 19:29:01.983 Info HttpServer: HTTP Response 200 to 10.0.0.13. Time: 3ms. http://10.0.0.225:80...?IsEnabled=true
2018-03-01 19:29:02.007 Info TaskManager: Scan media library Completed after 0 minute(s) and 0 seconds
New system:
MB: SUPERMICRO MBD-X10SDV-TLN4F-O (overkill, i know)
RAM: Crucial CT2K8G4RFS424A 16GB Kit (2 x 8GB) DDR4-2400 RDIMM
HD: 5 x 3TB in RAIDZ1
Last edited: