reinstalled Plex Plugin then changed Permissions Via Windows and Pool is now Unknown

[micro4]

OS VERSION: FreeNAS 11.3-u3.2
PHYSICAL MEMORY: 32711 MiB
HDD: 4x Hitachi 3TB 7200 RPM SAS drives
SYSTEM: Dell Poweredge R410
Striped Raid 5 Configuration.

Ok so here is what happened I had issues getting the plex Plugin to see my Pool called PPOOL it was constantly grayed out. So I uninstalled and reinstalled the Plex Plugin. Still grayed out. I found a post on here from some time ago that If you use windows you could change the permissions using windows and that would resolve the issue. I made the changes giving access to all users to the said pool where my plex data was. I had to walk away from the computer when I returned I was unable to login to the web interface. so I turned on the monitor on the server itself. Attempted to restart using the command line and that failed. I had to do a hard reset. Upon restart, PPOOL was in an unknown status. When I do check on the pool I see this

When I attempt to import I get this

So all drives are there but are unavailable????
Am I missing something here?
If I have to destroy the pool and start over whatever, I have a backup not attached to the system.
So can I fix it? Or do I have to rat over? If so How do I fix it?

 

[micro4]

OS VERSION: FreeNAS 11.3-u3.2
PHYSICAL MEMORY: 32711 MiB
HDD: 4x Hitachi 3TB 7200 RPM SAS drives
SYSTEM: Dell Poweredge R410
Striped Raid 5 Configuration.

Ok so here is what happened I had issues getting the plex Plugin to see my Pool called PPOOL it was constantly grayed out. So I uninstalled and reinstalled the Plex Plugin. Still grayed out. I found a post on here from some time ago that If you use windows you could change the permissions using windows and that would resolve the issue. I made the changes giving access to all users to the said pool where my plex data was. I had to walk away from the computer when I returned I was unable to login to the web interface. so I turned on the monitor on the server itself. Attempted to restart using the command line and that failed. I had to do a hard reset. Upon restart, PPOOL was in an unknown status. When I do check on the pool I see this
View attachment 39574
When I attempt to import I get this
View attachment 39575
So all drives are there but are unavailable????
Am I missing something here?
If I have to destroy the pool and start over whatever, I have a backup not attached to the system.
So can I fix it? Or do I have to rat over? If so How do I fix it?

Quick Update the post in question was not from here It was from the Plex forum.
PLEX FORUM POST

 

[micro4]

Another note... It now seems that the system says these discs are available for the creation of a new pool. Now I'm really confused

 

[micro4]

Well apparently Im a moron. I set the array to striped with no redundancy. So now everything is broken lol. Well I think I learned my lesson lol. But the issue is interesting but it was probably from me destroying the permissions