Error:
------------------------
Dec 25 18:19:19 freenas smartd[1973]: Device: /dev/ada0, can't monitor Temperature, ignoring -W Directive
Dec 25 18:19:19 freenas smartd[1973]: Unable to register ATA device /dev/ada0 at line 4 of file /usr/local/etc/smartd.conf
Dec 25 18:19:19 freenas smartd[1973]: Unable to register device /dev/ada0 (no Directive -d removable). Exiting.
Dec 25 18:19:19 freenas root: /etc/rc: WARNING: failed to start smartd
------------------------
smartctl -all /dev/ada0 infos:
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 i386] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Transcend CompactFlash Cards
Device Model: TS16GCF133
Serial Number: ****************
Firmware Version: 20110407
User Capacity: 16,022,200,320 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Dec 25 19:10:12 2012
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
2 Throughput_Performance 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
7 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
8 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 139
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
SMART Error Log not supported
(pass0:ata0:0:0:0): SMART. ACB: b0 d5 06 4f c2 40 00 00 00 00 01 00
(pass0:ata0:0:0:0): CAM status: ATA Status Error
(pass0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(pass0:ata0:0:0:0): RES: 51 04 06 4f c2 00 00 00 00 01 00
Error SMART Error Self-Test Log Read failed: No error: 0
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
--------------------------------------------------------------------------------------
I'm running the freenas on a cf card, but when it start it shows this error
is there something wrong with my settings?
Thanks very much
------------------------
Dec 25 18:19:19 freenas smartd[1973]: Device: /dev/ada0, can't monitor Temperature, ignoring -W Directive
Dec 25 18:19:19 freenas smartd[1973]: Unable to register ATA device /dev/ada0 at line 4 of file /usr/local/etc/smartd.conf
Dec 25 18:19:19 freenas smartd[1973]: Unable to register device /dev/ada0 (no Directive -d removable). Exiting.
Dec 25 18:19:19 freenas root: /etc/rc: WARNING: failed to start smartd
------------------------
smartctl -all /dev/ada0 infos:
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 i386] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Transcend CompactFlash Cards
Device Model: TS16GCF133
Serial Number: ****************
Firmware Version: 20110407
User Capacity: 16,022,200,320 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Dec 25 19:10:12 2012
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
2 Throughput_Performance 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
7 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
8 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 139
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
SMART Error Log not supported
(pass0:ata0:0:0:0): SMART. ACB: b0 d5 06 4f c2 40 00 00 00 00 01 00
(pass0:ata0:0:0:0): CAM status: ATA Status Error
(pass0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(pass0:ata0:0:0:0): RES: 51 04 06 4f c2 00 00 00 00 01 00
Error SMART Error Self-Test Log Read failed: No error: 0
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
--------------------------------------------------------------------------------------
I'm running the freenas on a cf card, but when it start it shows this error
is there something wrong with my settings?
Thanks very much