Problem upgrading jails to 13.0-Release

[Amsoil_Jim]

Just upgraded to TrueNAS 13.0-RELEASE
I was trying to upgrade to jails, I ran iocage fetch and fetched the 13.0-RELEASE
Then ran "iocage upgrade -r 13.0-RELEASE tautulli"

Code:

iocage upgrade -r 13.0-RELEASE tautulli
Snapshotting tautulli...
Snapshot already exists
Updating plugin INDEX...
Updating plugin artifact...
Cloning git repository

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE
Running upgrade...

then is runs and at the end states this

Code:

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE
Installing new pkgs...
Repo: iocage-plugins already exists, skipping!

Testing Host DNS response to pkg.FreeBSD.org
Testing tautulli's SRV response to pkg.FreeBSD.org
Testing tautulli's DNSSEC response to pkg.FreeBSD.org

Installing plugin packages:
  - lang/python...
  - py38-sqlite3...
  - py38-openssl...
  - security/ca_root_nss...
  - git...
Cloning git repository

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE

tautulli successfully upgraded!

However it's only upgraded to version 12.3-RELEASEp5

 

[ThreeDee]

Plugins are stuck with whatever version they where created with .. that's why I went to manual installs. Much easier to keep the jail itself and it's contents up to date

 

[Amsoil_Jim]

Plugins are stuck with whatever version they where created with .. that's why I went to manual installs. Much easier to keep the jail itself and it's contents up to date

ok, thanks, only a couple are actual plugins, guess I'll try the standard jails next

 

[Tenalto]

I am also having difficulty upgrading my jails to 13.0-RELEASE. I haven't had difficulty in the past, but I've been getting an error message after running

Code:

iocage upgrade -r 13.0-RELEASE [jailname]

.

Code:

Upgrade failed, nothing to install after fetch!

I checked and confirmed that I fetched 13.0-RELEASE.

 

[Jailer]

I am also having difficulty upgrading my jails to 13.0-RELEASE. I haven't had difficulty in the past, but I've been getting an error message after running

Code:

iocage upgrade -r 13.0-RELEASE [jailname]

.

Code:

Upgrade failed, nothing to install after fetch!

I checked and confirmed that I fetched 13.0-RELEASE.

It may be nothing but check your syntax for your upgrade command. The iocage docs list the upgrade command differently that what you posted. I don't know if it matters but it's worth a shot.

 

[macmuchmore]

Just upgraded to TrueNAS 13.0-RELEASE
I was trying to upgrade to jails, I ran iocage fetch and fetched the 13.0-RELEASE
Then ran "iocage upgrade -r 13.0-RELEASE tautulli"

Code:

iocage upgrade -r 13.0-RELEASE tautulli
Snapshotting tautulli...
Snapshot already exists
Updating plugin INDEX...
Updating plugin artifact...
Cloning git repository

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE
Running upgrade...

then is runs and at the end states this

Code:

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE
Installing new pkgs...
Repo: iocage-plugins already exists, skipping!

Testing Host DNS response to pkg.FreeBSD.org
Testing tautulli's SRV response to pkg.FreeBSD.org
Testing tautulli's DNSSEC response to pkg.FreeBSD.org

Installing plugin packages:
  - lang/python...
  - py38-sqlite3...
  - py38-openssl...
  - security/ca_root_nss...
  - git...
Cloning git repository

Branch 13.1-RELEASE does not exist at https://github.com/dropsignal/iocage-plugin-tautulli.git!
Using "master" branch for plugin, this may not work with your RELEASE

tautulli successfully upgraded!

However it's only upgraded to version 12.3-RELEASEp5

After I upgraded to 13.0-RELEASE, I updated the plugin I use (PLEX) and selected to update the jail as well, and when it was completed, the jail was on 13.0-RELEASE-p11. I don't know if that will help you or not....

 

[Tenalto]

It may be nothing but check your syntax for your upgrade command. The iocage docs list the upgrade command differently that what you posted. I don't know if it matters but it's worth a shot.

I tried what was in the iocage docs but still the same result.

 

[ThreeDee]

when I updated my jails I typed:

Code:

iocage upgrade [jailname] -r 13.0-RELEASE

..and they updated

 

[Tenalto]

I think I figured out why I couldn't upgrade my jails. I was using clone jails instead of base jails.

 

[Jailer]

I think I figured out why I couldn't upgrade my jails. I was using clone jails instead of base jails.

All my jails are clone jails, that's the default type jail that iocage creates. There has to be something else going to cause your upgrade problem. Run the following command using your jails name in place of jailname and post the output in code tags here.

iocage get all jailname | more

 

[Tenalto]

All my jails are clone jails, that's the default type jail that iocage creates. There has to be something else going to cause your upgrade problem. Run the following command using your jails name in place of jailname and post the output in code tags here.

iocage get all jailname | more

Code:

root@freenas[~]# iocage get all nextcloud | more
CONFIG_VERSION:28
allow_chflags:0
allow_mlock:0
allow_mount:1
allow_mount_devfs:0
allow_mount_fusefs:0
allow_mount_nullfs:0
allow_mount_procfs:0
allow_mount_tmpfs:0
allow_mount_zfs:0
allow_quotas:0
allow_raw_sockets:1
allow_set_hostname:1
allow_socket_af:0
allow_sysvipc:0
allow_tun:0
allow_vmm:0
assign_localhost:0
available:readonly
basejail:0
boot:1
bpf:0
children_max:0
cloned_release:12.3-RELEASE
comment:none
compression:lz4
compressratio:readonly
coredumpsize:off
count:1
cpuset:off
cputime:off
datasize:off
dedup:off
defaultrouter:192.168.1.1
defaultrouter6:auto
depends:none
devfs_ruleset:4
dhcp:0
enforce_statfs:2
exec_clean:1
exec_created:/usr/bin/true
exec_fib:0
exec_jail_user:root
exec_poststart:/usr/bin/true
exec_poststop:/usr/bin/true
exec_prestart:/usr/bin/true
exec_prestop:/usr/bin/true
exec_start:/bin/sh /etc/rc
exec_stop:/bin/sh /etc/rc.shutdown
exec_system_jail_user:0
exec_system_user:root
exec_timeout:60
host_domainname:none
host_hostname:nextcloud
host_hostuuid:nextcloud
host_time:1
hostid:00000000-0000-0000-0000-4ccc6a92815d
hostid_strict_check:0
interfaces:vnet0:bridge0
ip4:new
ip4_addr:vnet0|192.168.1.5/24
ip4_saddrsel:1
ip6:new
ip6_addr:none
ip6_saddrsel:1
ip_hostname:0
jail_zfs:0
jail_zfs_dataset:iocage/jails/nextcloud/data
jail_zfs_mountpoint:none
last_started:2022-05-13 22:31:58
localhost_ip:none
login_flags:-f root
mac_prefix:02ff60
maxproc:off
memorylocked:off
memoryuse:off
min_dyn_devfs_ruleset:1000
mount_devfs:1
mount_fdescfs:1
mount_linprocfs:0
mount_procfs:0
mountpoint:readonly
msgqqueued:off
msgqsize:off
nat:0
nat_backend:ipfw
nat_forwards:none
nat_interface:none
nat_prefix:172.16
nmsgq:off
notes:none
nsem:off
nsemop:off
nshm:off
nthr:off
openfiles:off
origin:readonly
owner:root
pcpu:off
plugin_name:none
plugin_repository:none
priority:99
pseudoterminals:off
quota:none
readbps:off
readiops:off
release:12.3-RELEASE
reservation:none
resolver:/etc/resolv.conf
rlimits:off
rtsold:0
securelevel:2
shmsize:off
stacksize:off
state:up
stop_timeout:30
swapuse:off
sync_state:none
sync_target:none
sync_tgt_zpool:none
sysvmsg:new
sysvsem:new
sysvshm:new
template:0
type:jail
used:readonly
vmemoryuse:off
vnet:1
vnet0_mac:02ff60bab581 02ff60bab582
vnet0_mtu:auto
vnet1_mac:none
vnet1_mtu:auto
vnet2_mac:none
vnet2_mtu:auto
vnet3_mac:none
vnet3_mtu:auto
vnet_default_interface:auto
vnet_default_m

I really appreciate the help.

 

[Amsoil_Jim]

Just an update, I did successfully complete the upgrade of my standard jails. I had one jail where the upgrade was almost instant but the others took a very long time, the last one I did took over an hour and a half to complete.