neverfinder
Dabbler
- Joined
- Dec 10, 2018
- Messages
- 19
Hi there,
I started installing my FreeNAS system a week ago and everything was working fine. Network setup, general configuration.
Today came my LSI / Broadcom HBA LSI SAS 9300-8i. I put the card in and the first problem is that FreeNAS is not booting anymore. I can access the NAS via IPMI and after "booting" I see a black screen with a _. In addition, I can't get into the Bios anymore. (delet does not work neither does F11 for boot options) I can press them as much as I want and still land in the black screen with the _.
I don't see any information about the LSI card when booting... Once I remove the card I can get back to bios or boot FreeNAS.
Could it be a Bios setting I have to change? Is there a way to force booting to the Bios with the card? (Without having to press anything?)
I installed FreeNAS using EFI/EFI not legacy. Could there be a problem? Any other ideas? Is the "lag" on the IPMI to large to get into the bios?
System is:
Motherboard: Supermicro X11SDV-4C-TLN2F retail (MBD-X11SDV-4C-TLN2F-O)
CPU: Intel Xeon D-2123IT
RAM: 4x Samsung DIMM 16GB, DDR4-2400, CL17-17-17, reg ECC (M393A2K43CB1-CRC)
Power Supply: Seasonic Focus Plus Platinum 550W ATX 2.4 (SSR-550PX)
Storage: 8x10TB RAIDZ2 (3x10000GB Hitachi Ultrastar He10 0F27452 256MB 3.5" (8.9cm) SATA 6Gb/s 5x Seagate Enterprise Capacity 3,5" 10TB)
Storage Card: Broadcom SAS 9300-8i, PCIe 3.0 x8 (LSI00344)
Boot Device: Corsair Force LS - Rev. B - 60GB, SATA (CSSD-F60GBLSB)
I started installing my FreeNAS system a week ago and everything was working fine. Network setup, general configuration.
Today came my LSI / Broadcom HBA LSI SAS 9300-8i. I put the card in and the first problem is that FreeNAS is not booting anymore. I can access the NAS via IPMI and after "booting" I see a black screen with a _. In addition, I can't get into the Bios anymore. (delet does not work neither does F11 for boot options) I can press them as much as I want and still land in the black screen with the _.
I don't see any information about the LSI card when booting... Once I remove the card I can get back to bios or boot FreeNAS.
Could it be a Bios setting I have to change? Is there a way to force booting to the Bios with the card? (Without having to press anything?)
I installed FreeNAS using EFI/EFI not legacy. Could there be a problem? Any other ideas? Is the "lag" on the IPMI to large to get into the bios?
System is:
Motherboard: Supermicro X11SDV-4C-TLN2F retail (MBD-X11SDV-4C-TLN2F-O)
CPU: Intel Xeon D-2123IT
RAM: 4x Samsung DIMM 16GB, DDR4-2400, CL17-17-17, reg ECC (M393A2K43CB1-CRC)
Power Supply: Seasonic Focus Plus Platinum 550W ATX 2.4 (SSR-550PX)
Storage: 8x10TB RAIDZ2 (3x10000GB Hitachi Ultrastar He10 0F27452 256MB 3.5" (8.9cm) SATA 6Gb/s 5x Seagate Enterprise Capacity 3,5" 10TB)
Storage Card: Broadcom SAS 9300-8i, PCIe 3.0 x8 (LSI00344)
Boot Device: Corsair Force LS - Rev. B - 60GB, SATA (CSSD-F60GBLSB)