Florian Mulatz
Cadet
- Joined
- Oct 19, 2016
- Messages
- 5
Hey Guys,
I'm facing a curious problem actually. Yesterday I replaced a disk in one of our stg-pools on one of our FreeNAS Systems on Desaster-Recovery-Site.
The disk itself (da1 - just wondering why only this disk is not showed with gptid?!) was resilvering normally and actually the pool is available via CLI -->
But exactly that pool named "mia" is not available via webgui. I (of course) already looked around in this board to fix this problem on my own without bothering you guys but nothing posted works for me.
I tried to export the volume via CLI to reimport it via webgui but this does not work.
Please give me some hints what's going on there ...
PS: of course I tried several reboots - after every reboot the pool is showed up normally via CLI but not via WebGUI
PPS: Hardware:
Dell R710 with attached
- Dell PowerVault MD1000 (Ctrl: Dell Ctrl. SAS1068E) -- this is the one which actually makes problems
- Dell PowerVault MD1200 (Ctrl: Dell Ctrl. SAS2008)
I'm facing a curious problem actually. Yesterday I replaced a disk in one of our stg-pools on one of our FreeNAS Systems on Desaster-Recovery-Site.
The disk itself (da1 - just wondering why only this disk is not showed with gptid?!) was resilvering normally and actually the pool is available via CLI -->
Code:
[root@b1500cce] /mnt# zpool status mia pool: mia state: ONLINE scan: scrub repaired 0 in 1h26m with 0 errors on Thu Nov 24 06:42:25 2016 config: NAME STATE READ WRITE CKSUM mia ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/7182dce4-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 da1 ONLINE 0 0 0 gptid/72da6993-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/738d570d-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/743e5e56-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/74e707f1-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/7595562c-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/763f36c1-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/76e015f2-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/778769ff-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/7825bf0e-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/78ca34f9-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/7975c4db-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/7a248acf-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 gptid/7ad3aa9d-8b19-11e6-a6fb-b8ac6f857db7 ONLINE 0 0 0 errors: No known data errors
But exactly that pool named "mia" is not available via webgui. I (of course) already looked around in this board to fix this problem on my own without bothering you guys but nothing posted works for me.
I tried to export the volume via CLI to reimport it via webgui but this does not work.
Code:
[root@b1500cce] /mnt# zpool export mia cannot export 'mia': pool is busy [root@b1500cce] /mnt# zpool export -f mia cannot export 'mia': pool is busy [root@b1500cce] /mnt#
Please give me some hints what's going on there ...
PS: of course I tried several reboots - after every reboot the pool is showed up normally via CLI but not via WebGUI
PPS: Hardware:
Dell R710 with attached
- Dell PowerVault MD1000 (Ctrl: Dell Ctrl. SAS1068E) -- this is the one which actually makes problems
- Dell PowerVault MD1200 (Ctrl: Dell Ctrl. SAS2008)