Plex wont update

[johnism]

I was following this thread and trying some the cmd to upgrade Plex ..

Plex wont update 13.0-U1

So after todays update to 13.0-U1 i was finally able to access my VM again, but ive run into another issue ! when trying to update plex with my usual method of "pkg update && pkg upgrade" it says it cant find repository. i think this was present before updating today though. i then tried...

www.truenas.com

Below is my output -
FreeBSD 13.1-RELEASE-p9 n245429-296d095698e TRUENAS
TrueNAS (c) 2009-2023, iXsystems, Inc. All rights reserved.
TrueNAS code is released under the modified BSD license with some
files copyrighted by (c) iXsystems, Inc.
For more information, documentation, help or support, go here:

TrueNAS - Open Enterprise Storage

TrueNAS is the World's #1 Open Source Enterprise Storage, based on OpenZFS. It is trusted by millions and deployed worldwide.

truenas.com

Welcome to TrueNAS
Warning: the supported mechanisms for making configuration changes

are the TrueNAS WebUI and API exclusively. ALL OTHERS ARE

NOT SUPPORTED AND WILL RESULT IN UNDEFINED BEHAVIOR AND MAY

RESULT IN SYSTEM FAILURE.

root@truenas[~]# iocage list

+-----+----------+-------+--------------+------+

| JID | NAME | STATE | RELEASE | IP4 |

+=====+==========+=======+==============+======+

| 1 | plexjail | up | 13.0-RELEASE | DHCP |

+-----+----------+-------+--------------+------+

root@truenas[~]# iocage pkg plex upgrade

Updating iocage-plugins repository catalogue...

[plexjail] Fetching packagesite.pkg: .......... done

Processing entries:

Newer FreeBSD version for package zziplib:

To ignore this error set IGNORE_OSVERSION=yes

- package: 1302001

- running kernel: 1300139

Ignore the mismatch and continue? [y/N]: Processing entries... done


pkg: repository iocage-plugins contains packages for wrong OS version: FreeBSD:13:amd64


Unable to update repository iocage-plugins


pkg: repository iocage-plugins contains packages for wrong OS version: FreeBSD:13:amd64


Error updating repositories!


pkg: repository iocage-plugins contains packages for wrong OS version: FreeBSD:13:amd64


pkg: repository iocage-plugins contains packages foor wrong OS version: FreeBSD:13:amd64


Any idea what the CMD would be for my updated version ?
Thanks for any help,
John

 

[winnielinnie]

You should "enter" the jail, first, before trying to update via the "pkg" command.

Code:

iocage console plexjail

 

[johnism]

now I get this ..
To change this login announcement, see motd(5).

root@plexjail:~ # iocage pkg plex upgrade

iocage: Command not found.

root@plexjail:~ #

 

[danb35]

The command given in that thread was wrong. Inside the jail (which you are in your last post), you'd run pkg upgrade. But it'd be better to first upgrade the jail to the current FreeBSD release. To do that, from the TrueNAS shell (i.e., not inside the jail), run iocage upgrade -r 13.2-RELEASE plexjail.

 

[johnism]

Looks like I am at 13.0 see output below ..

root@truenas[~]# iocage upgrade -r 13.2-RELEASE plexjail
Snapshotting plexjail...
Updating plugin INDEX...
Updating plugin artifact...
Cloning git repository

Branch 13.1-RELEASE does not exist at https://github.com/freenas/iocage-plugin-plexmediaserver.git!
Using "master" branch for plugin, this may not work with your RELEASE

Host: 13.1-RELEASE is not greater than target: 13.2-RELEASE
This is unsupported.
root@truenas[~]# iocage list
+-----+----------+-------+--------------+------+
| JID | NAME | STATE | RELEASE | IP4 |
+=====+==========+=======+==============+======+
| 1 | plexjail | up | 13.0-RELEASE | DHCP |
+-----+----------+-------+--------------+------+
root@truenas[~]#

Do I need to do a "iocage upgrade -r 13.1-RELEASE plexjail" and then "iocage upgrade -r 13.2-RELEASE plexjail"?
Thanks for the help!!!!

 

[danb35]

If you're using the plugin (you didn't mention that in your OP), forget it. Leave it be until there's an upgrade available through the TrueNAS GUI, and come up with a plan to move away from the deprecated plugin.

 

[johnism]

I am assuming to move away from the plugin I would create a new jail / configure . Then export my Plex config and import that under the new setup ?
Are you aware of an documents on how to setup Plex with up the plugin ?
Thanks again

 

[victort]

Check my signature for a list of scripts. Plex is there also.

 

[johnism]

Check my signature for a list of scripts. Plex is there also.

AH very cool I will check it out . Now I am assuming this is setting a new configuration and everything or once the new jail is built can I export an Plex config of my current ?
Thanks again ...