These parts are on the way, but I can still swap stuff if needed.
4 x Kingston 8GB 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1333 Server Memory Server Hynix M Model KVR13E9/8HM
1 x SUPERMICRO MBD-X9SCL-F-O LGA 1155 Intel C202 Micro ATX Intel Xeon E3 Server Motherboard
1 X Intel Core i3-2130 Dual-Core Processor 3.4 GHz 3 MB Cache LGA
1 X Lian Li PC-P50
1 X SAS9211-8I 8PORT Int 6GB Sata+sas Pcie 2.0
2 x CSE-M35T-1B Black 5x3 Disk Cage
1 X Seasonic SS-560KM Active PFC F3
My plan is to run 10 X 3TB drives in RAIDZ2 in a single Vdev for 24TB useable (give or take). I realize this may be a little wide. I'm thinking of using 8 X WD RED drives for data together with 1 X Constellation and 1 X RE4 for parity.
This is my first build, so any gotchas or other thoughts are greatly appreciated.
4 x Kingston 8GB 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1333 Server Memory Server Hynix M Model KVR13E9/8HM
1 x SUPERMICRO MBD-X9SCL-F-O LGA 1155 Intel C202 Micro ATX Intel Xeon E3 Server Motherboard
1 X Intel Core i3-2130 Dual-Core Processor 3.4 GHz 3 MB Cache LGA
1 X Lian Li PC-P50
1 X SAS9211-8I 8PORT Int 6GB Sata+sas Pcie 2.0
2 x CSE-M35T-1B Black 5x3 Disk Cage
1 X Seasonic SS-560KM Active PFC F3
My plan is to run 10 X 3TB drives in RAIDZ2 in a single Vdev for 24TB useable (give or take). I realize this may be a little wide. I'm thinking of using 8 X WD RED drives for data together with 1 X Constellation and 1 X RE4 for parity.
This is my first build, so any gotchas or other thoughts are greatly appreciated.
