BUILD New Intel Xeon-D steppings

Status
Not open for further replies.

Steve Salier

Dabbler
Joined
Dec 10, 2012
Messages
18
FYI ... for anyone looking at Xeon-D builds - these revised 1520/1541 steppings have also supposedly addressed multiple errata on the current versions (including lack of TSX and SR-IOV) - this has yet to be definitively confirmed however.

SM has NOT changed any of the 1520 SKUs to indicate which CPU you will receive so i guess we have to wait for old inventory to move.

From: http://www.cpu-world.com/news_2015/2015080401_Xeon_D-1521_and_D-1541_SoCs_to_launch_in_Q4_2015.html

Intel currently offers two server-class products, based on Broadwell microarchitecture: Xeon E3-1200 v4 series, aimed at single-socket workstations, and Xeon D family for microservers. The latter processors are implemented as systems on a chip, and can pack up to 8 "Broadwell" CPU cores on a die, along with up to 12 MB of L3 cache and a handful of I/O interfaces. First Xeon D SoCs, D-1520 and D-1540, have been launched in the second quarter of 2015. According to recently released Product Change Notification (PCN), they will be replaced with Xeon D-1521 and D-1541 models. Both new chips will feature higher clock rates and add support for DDR3 memory.

Xeon D-1541 will have base and turbo frequencies increased by 100 MHz to 2.1 GHz and 2.7 GHz respectively. Its memory controller will support DDR3-1600 and DDR4-2400 memory. The PCN states that the SoC will also have "KR functionality added", however it does not provide any specifics on the KR feature. We assume that remaining characteristics have not changed. As such, the D-1541 should have 8 CPU cores, 12 MB of L3 cache and 45 Watt TDP.

Xeon D-1521 will operate at 2.4 GHz and have the maximum Turbo Boost frequency of 2.7 GHz. It will also support DDR3-1600 memory and the KR feature. The rest of the specs should be identical to the D-1520: 4 CPU cores, 6 MB of L3 cache and DDR4-2133 memory support. It will fit into 45 Watt thermal envelope.

Both chips will be based on newer stepping of Broadwell-DE core, and will integrate PCI Express 2.0 and 3.0, SATA 3, USB 2.0/3.0 and Ethernet controllers. The SoCs will be produced in a BGA package. First production versions of D-1521 and D-1541 processors will be available on November 2, 2015.
 

diskdiddler

Wizard
Joined
Jul 9, 2014
Messages
2,377
I just did a quick googling on what might be a reasonably priced, quad core intel cpu, with ECC support and 14nm (low power, low heat) The best one I found was indeed this puppy.
http://ark.intel.com/products/91202/Intel-Xeon-Processor-D-1521-6M-Cache-2_40-GHz
Intel® Xeon® Processor D-1521
(6M Cache, 2.40 GHz)
Only 45w (a tad high for me but still reasonable)
Modern tech being 14nm and late 2015 release.
Anyone know an ITX board that would support it, with ECC support (I'm gonna speculate 0 boards, right? :( )
Socket: FCBGA1667

Only other nice CPU I found was this one
http://ark.intel.com/products/88170/Intel-Xeon-Processor-E3-1235L-v5-8M-Cache-2_00-GHz
Intel® Xeon® Processor E3-1235L v5
(8M Cache, 2.00 GHz) only $250 US, 14nm, 4 cores.
Socket: FCLGA1151

Presumably these little fellas are hard to get at a reasonable price?
I imagine they'd be much much better than my AMD Turion N54L in my HP Microserver tho, (45nm, manufactured 2010, really straining the poor beast over the years, hesitant to run too many jails)
 

diskdiddler

Wizard
Joined
Jul 9, 2014
Messages
2,377
BTW I did a further google Asrock make a C236 board, 8 SATA ports and ITX
However it doesn't support the E3 1235L CPU according to the website.
http://www.asrockrack.com/general/productdetail.asp?Model=C236 WSI#CPU

Here's all the v5 series Intel Xeon E3's
http://ark.intel.com/products/family/88210/Intel-Xeon-Processor-E3-v5-Family#@Server

Clearly, I'm dumb here :( I don't know why this is the case?

It will however support the E3 1240L which is slightly more expensive and still very low wattage.
http://ark.intel.com/products/88169/Intel-Xeon-Processor-E3-1240L-v5-8M-Cache-2_10-GHz

Either way, I feel like I have a good idea, what I would buy, were my Microserver to die.
 

diskdiddler

Wizard
Joined
Jul 9, 2014
Messages
2,377
Update, I think the C236 chipset requires UDIMM (unbuferred??) ECC ram, and that SEEMS to be vastly more expensive than registered, is that correct? :(
EDIT: Never mind holy crap.
http://forum.hwbot.org/showpost.php?s=6b3a46b53ca6ebeb0d7ab8291a6f0ab6&p=423058&postcount=3

$650 US for a board. I'd pay $300 for an Asrock ITX board and I get it's "server" stuff but $650?
Man........ no wonder so many home built NAS options just stick with regular Desktop (not Xeon) CPU's and non ECC systems.
I wanted to do the right thing by Cyberjock too and go ECC.
Bugger that.
 

TheKiwi

Explorer
Joined
Dec 27, 2015
Messages
54
Update, I think the C236 chipset requires UDIMM (unbuferred??) ECC ram, and that SEEMS to be vastly more expensive than registered, is that correct? :(
EDIT: Never mind holy crap.
http://forum.hwbot.org/showpost.php?s=6b3a46b53ca6ebeb0d7ab8291a6f0ab6&p=423058&postcount=3

$650 US for a board. I'd pay $300 for an Asrock ITX board and I get it's "server" stuff but $650?
Man........ no wonder so many home built NAS options just stick with regular Desktop (not Xeon) CPU's and non ECC systems.
I wanted to do the right thing by Cyberjock too and go ECC.
Bugger that.
Wait, what? What are you trying to do exactly? ECC is not expensive and neither are server-grade boards. Unless you really really need ITX, Supermicro has bucketloads of cheap mATX X11 boards which work awesomely. As for ram, DDR4 UDIMMs are cheap and if you think they are super vastly expensive, I suggest you do some more research.

Also, please do make your own thread. This really had nothing to do with the original post.
 
Last edited:
Status
Not open for further replies.
Top