Need help made a mistake

[frank3523]

Hello I accidently made a mistake by removing on sata cable.
Now my zpool status is degraded.
Did a shutdown and installed the cable again but the status of the zpool is still degraded.

I Have now 2 disks with the same serial in my pool the name of both disks is ada1.

pool: freenas-volu
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scrub: none requested
config:

NAME STATE READ WRITE CKSUM
freenas-volu DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
3642872288631289690 UNAVAIL 0 0 0 was /dev/ada0p2
ada1p2 ONLINE 0 0 0
ada2p2 ONLINE 0 0 0
ada3p2 ONLINE 0 0 0

errors: Permanent errors have been detected in the following files:

freenas-volu:<0x95>

Any help would be appreciated.

 

[ProtoSD]

Running a scrub should clear things up. I prefer the command line "zpool scrub freenas-volu", but depending on which version of FreeNAS you are using you could do it from the GUI also.

 

[frank3523]

Running a scrub should clear things up. I prefer the command line "zpool scrub freenas-volu", but depending on which version of FreeNAS you are using you could do it from the GUI also.

Thanks for the help that helped all is oke now.