Kenny Simpson
Cadet
- Joined
- May 19, 2017
- Messages
- 6
I installed a ConnectX-4 card in a x16 slot, but no new interfaces are showing up. I do see in the logs that there is a mlx5_core driver that does recognize which port has a module:
mlx5_core0: <mlx5_core> mem 0xf8000000-0xf9ffffff irq 64 at device 0.0 numa-domain 1 on pci13
mlx5_core0: INFO: firmware version: 12.17.2032
mlx5_core0: INFO: Module 0, status: plugged
mlx5_core1: <mlx5_core> mem 0xf6000000-0xf7ffffff irq 68 at device 0.1 numa-domain 1 on pci13
mlx5_core1: INFO: firmware version: 12.17.2032
mlx5_core1: INFO: Module 1, status: unplugged
I've tried 'kldload mlx5en', but that yields:
kldload: can't load mlx5en: module already loaded or in kernel
'kldstat -v' does not show such a module, but neither does it show mlx5_core.
How can this card be enabled to provide ethernet interfaces?
mlx5_core0: <mlx5_core> mem 0xf8000000-0xf9ffffff irq 64 at device 0.0 numa-domain 1 on pci13
mlx5_core0: INFO: firmware version: 12.17.2032
mlx5_core0: INFO: Module 0, status: plugged
mlx5_core1: <mlx5_core> mem 0xf6000000-0xf7ffffff irq 68 at device 0.1 numa-domain 1 on pci13
mlx5_core1: INFO: firmware version: 12.17.2032
mlx5_core1: INFO: Module 1, status: unplugged
I've tried 'kldload mlx5en', but that yields:
kldload: can't load mlx5en: module already loaded or in kernel
'kldstat -v' does not show such a module, but neither does it show mlx5_core.
How can this card be enabled to provide ethernet interfaces?