SOLVED Lost power to disk array and 1 pool is no longer showing up... HELP PLEASE

j.bauman146318 · May 7, 2019

Prior to the power failure I had 3 pools. After power was restored back to the disk array (the Head Unit never lost power), I restarted freenas and was presented with 3 pools. 2 of them were listed as being healthy. And the third being listed as UNKNOWN. I exported the UNKNOWN pool and attempted to import. The UNKNOWN pool was not an option in the pool drop down list when trying to import a previous pool. I have not tried to do any superhero recovery outside of the export/import actions. These pools were all configured as RAIDz3 pools. I have the disks and locations stored in a spreadsheet so they are easily found. Please help with troubleshooting. If there is any more information needed please let me know as I will provide it as soon as possible. Thanks all!

Hardware:

Head Unit:

HP DL380 G7 fully patched to latest supported post prod SPP

Intel Xeon CPU E5620 x2

32 GB of ECC RAM

Dell PERC SAS HBA flashed to IT mode

QLogic 2564 4 port Fibre Channel card

Disk Array:

NetApp DS4243

Software:

FreeNAS-11.2-U3

Fibre Channel configured based on the following link:

https://www.ixsystems.com/community/resources/fibre-channel-on-freenas-11-1u4.93/

dlavigne · May 9, 2019

Has this been resolved? If not, what is the output of zpool status within code tags?

j.bauman146318 · May 9, 2019

I am currently responding through my phone. I hipe a picture will suffice... the third pool (freenaspool-1) is not even shown on this output.

j.bauman146318 · May 9, 2019

Another bit of information... upon rebooting, the disks that are associated with the pool having issues are showing the following: "GEOM: multipath/disk#: corrupt or invalid GPT detected.
GEOM: multipath/disk#: GPT rejected - may not be recoverable."
Those lines are indicated for each disk that is assigned to the pool.

j.bauman146318 · May 10, 2019

Keep in mind, I did not have the GEOM messages prior to the power failure event.

j.bauman146318 · May 11, 2019

Anybody have any ideas?

pro lamer · May 11, 2019

Have you seen our forums hard disk troubleshooting guide/resource?

Sent from my phone

j.bauman146318 · May 11, 2019

Thank for pointing me in that direction. I will follow this guide and update this thread. Good or bad. Thanks Pro!

Redcoat · May 11, 2019

@mav@ from iXsystems wrote FreeBSD man page(s) on gmultipath and has written here on the forum on issues with multipath disks including this one https://www.ixsystems.com/community...nd-possibly-destroyed-pool-please-help.70694/

I pinged him with the reference - perhaps he will pick it up and comment for you, OP.

j.bauman146318 · May 11, 2019

Thank you Redcoat! I am reading through that thread to familiarize myself. I have ran through some of the troubleshooting tips that Pro stated and here are the smart results for the 6 disks in question:
Code tag follows (hopefully I do it right first time):

Code:

root@BN-Storage[/]# smartctl -a /dev/da40
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDS721010KLA33SA
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c900000cbbc
Serial number:        GTH000PAG6YG9H
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:05:44 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     38 C
Drive Trip Temperature:        <not available>

Manufactured in week    of year
Specified cycle count over device lifetime:  0
Accumulated start-stop cycles:  55
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 62
  Blocks received from initiator = 0
  Blocks read from cache and sent to initiator = 43
  Number of read and write commands whose size <= segment size = 0
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 59323.07
  number of minutes until next internal SMART test = 28

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Foreground long   Completed                   -       0                 - [-   -    -]
# 2  Foreground long   Completed                   -       0                 - [-   -    -]
# 3  Foreground long   Completed                   -       0                 - [-   -    -]
# 4  Foreground long   Completed                   -       0                 - [-   -    -]
# 5  Foreground long   Completed                   -       0                 - [-   -    -]
# 6  Foreground long   Completed                   -       0                 - [-   -    -]
# 7  Foreground long   Completed                   -       0                 - [-   -    -]
# 8  Foreground long   Completed                   -       0                 - [-   -    -]
# 9  Foreground long   Completed                   -       0                 - [-   -    -]
#10  Foreground long   Completed                   -       0                 - [-   -    -]
#11  Foreground long   Completed                   -       0                 - [-   -    -]
#12  Foreground long   Completed                   -       0                 - [-   -    -]
#13  Foreground long   Completed                   -       0                 - [-   -    -]
#14  Foreground long   Completed                   -       0                 - [-   -    -]
#15  Foreground long   Completed                   -       0                 - [-   -    -]
#16  Foreground long   Completed                   -       0                 - [-   -    -]
#17  Foreground long   Completed                   -       0                 - [-   -    -]
#18  Foreground long   Completed                   -       0                 - [-   -    -]
#19  Foreground long   Completed                   -       0                 - [-   -    -]

root@BN-Storage[/]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
root@BN-Storage[/]# smartctl -a /dev/da41
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDS721010KLA33SA
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c900001c2ac
Serial number:        GTH000PAG6YHAH
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:06:50 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     38 C
Drive Trip Temperature:        <not available>

Manufactured in week    of year
Specified cycle count over device lifetime:  0
Accumulated start-stop cycles:  55
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 63
  Blocks received from initiator = 0
  Blocks read from cache and sent to initiator = 43
  Number of read and write commands whose size <= segment size = 0
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 59323.12
  number of minutes until next internal SMART test = 27

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Foreground long   Completed                   -       0                 - [-   -    -]
# 2  Foreground long   Completed                   -       0                 - [-   -    -]
# 3  Foreground long   Completed                   -       0                 - [-   -    -]
# 4  Foreground long   Completed                   -       0                 - [-   -    -]
# 5  Foreground long   Completed                   -       0                 - [-   -    -]
# 6  Foreground long   Completed                   -       0                 - [-   -    -]
# 7  Foreground long   Completed                   -       0                 - [-   -    -]
# 8  Foreground long   Completed                   -       0                 - [-   -    -]
# 9  Foreground long   Completed                   -       0                 - [-   -    -]
#10  Foreground long   Completed                   -       0                 - [-   -    -]
#11  Foreground long   Completed                   -       0                 - [-   -    -]
#12  Foreground long   Completed                   -       0                 - [-   -    -]
#13  Foreground long   Completed                   -       0                 - [-   -    -]
#14  Foreground long   Completed                   -       0                 - [-   -    -]
#15  Foreground long   Completed                   -       0                 - [-   -    -]
#16  Foreground long   Completed                   -       0                 - [-   -    -]
#17  Foreground long   Completed                   -       0                 - [-   -    -]
#18  Foreground long   Completed                   -       0                 - [-   -    -]
#19  Foreground long   Completed                   -       0                 - [-   -    -]

root@BN-Storage[/]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
root@BN-Storage[/]# smartctl -a /dev/da42
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDS721010KLA33SA
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c9000017060
Serial number:        GTH000PAGDZ1XH
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:07:24 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     38 C
Drive Trip Temperature:        <not available>

Manufactured in week    of year
Specified cycle count over device lifetime:  0
Accumulated start-stop cycles:  55
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 59
  Blocks received from initiator = 0
  Blocks read from cache and sent to initiator = 43
  Number of read and write commands whose size <= segment size = 0
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 59322.85
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Foreground long   Completed                   -       0                 - [-   -    -]
# 2  Foreground long   Completed                   -       0                 - [-   -    -]
# 3  Foreground long   Completed                   -       0                 - [-   -    -]
# 4  Foreground long   Completed                   -       0                 - [-   -    -]
# 5  Foreground long   Completed                   -       0                 - [-   -    -]
# 6  Foreground long   Completed                   -       0                 - [-   -    -]
# 7  Foreground long   Completed                   -       0                 - [-   -    -]
# 8  Foreground long   Completed                   -       0                 - [-   -    -]
# 9  Foreground long   Completed                   -       0                 - [-   -    -]
#10  Foreground long   Completed                   -       0                 - [-   -    -]
#11  Foreground long   Completed                   -       0                 - [-   -    -]
#12  Foreground long   Completed                   -       0                 - [-   -    -]
#13  Foreground long   Completed                   -       0                 - [-   -    -]
#14  Foreground long   Completed                   -       0                 - [-   -    -]
#15  Foreground long   Completed                   -       0                 - [-   -    -]
#16  Foreground long   Completed                   -       0                 - [-   -    -]
#17  Foreground long   Completed                   -       0                 - [-   -    -]
#18  Foreground long   Completed                   -       0                 - [-   -    -]
#19  Foreground long   Completed                   -       0                 - [-   -    -]

root@BN-Storage[/]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
root@BN-Storage[/]# smartctl -a /dev/da43
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDT721010SLA36SA
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c9000015d04
Serial number:        STF607MH3L9L2K
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:07:57 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        <not available>

Manufactured in week    of year
Specified cycle count over device lifetime:  0
Accumulated start-stop cycles:  55
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 54
  Blocks received from initiator = 0
  Blocks read from cache and sent to initiator = 43
  Number of read and write commands whose size <= segment size = 0
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 59322.68
  number of minutes until next internal SMART test = 25

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Foreground long   Completed                   -       0                 - [-   -    -]
# 2  Foreground long   Completed                   -       0                 - [-   -    -]
# 3  Foreground long   Completed                   -       0                 - [-   -    -]
# 4  Foreground long   Completed                   -       0                 - [-   -    -]
# 5  Foreground long   Completed                   -       0                 - [-   -    -]
# 6  Foreground long   Completed                   -       0                 - [-   -    -]
# 7  Foreground long   Completed                   -       0                 - [-   -    -]
# 8  Foreground long   Completed                   -       0                 - [-   -    -]
# 9  Foreground long   Completed                   -       0                 - [-   -    -]
#10  Foreground long   Completed                   -       0                 - [-   -    -]
#11  Foreground long   Completed                   -       0                 - [-   -    -]
#12  Foreground long   Completed                   -       0                 - [-   -    -]
#13  Foreground long   Completed                   -       0                 - [-   -    -]
#14  Foreground long   Completed                   -       0                 - [-   -    -]
#15  Foreground long   Completed                   -       0                 - [-   -    -]
#16  Foreground long   Completed                   -       0                 - [-   -    -]
#17  Foreground long   Completed                   -       0                 - [-   -    -]
#18  Foreground long   Completed                   -       0                 - [-   -    -]
#19  Foreground long   Completed                   -       0                 - [-   -    -]

Long (extended) Self Test duration: 14100 seconds [235.0 minutes]

root@BN-Storage[/]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
root@BN-Storage[/]# smartctl -a /dev/da44
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDS721010KLA33SA
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c900002d274
Serial number:        GTH000PAGDZ19H
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:08:27 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     38 C
Drive Trip Temperature:        <not available>

Manufactured in week    of year
Specified cycle count over device lifetime:  0
Accumulated start-stop cycles:  64
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 53
  Blocks received from initiator = 0
  Blocks read from cache and sent to initiator = 43
  Number of read and write commands whose size <= segment size = 0
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 59322.78
  number of minutes until next internal SMART test = 24

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Foreground long   Completed                   -       0                 - [-   -    -]
# 2  Foreground long   Completed                   -       0                 - [-   -    -]
# 3  Foreground long   Completed                   -       0                 - [-   -    -]
# 4  Foreground long   Completed                   -       0                 - [-   -    -]
# 5  Foreground long   Completed                   -       0                 - [-   -    -]
# 6  Foreground long   Completed                   -       0                 - [-   -    -]
# 7  Foreground long   Completed                   -       0                 - [-   -    -]
# 8  Foreground long   Completed                   -       0                 - [-   -    -]
# 9  Foreground long   Completed                   -       0                 - [-   -    -]
#10  Foreground long   Completed                   -       0                 - [-   -    -]
#11  Foreground long   Completed                   -       0                 - [-   -    -]
#12  Foreground long   Completed                   -       0                 - [-   -    -]
#13  Foreground long   Completed                   -       0                 - [-   -    -]
#14  Foreground long   Completed                   -       0                 - [-   -    -]
#15  Foreground long   Completed                   -       0                 - [-   -    -]
#16  Foreground long   Completed                   -       0                 - [-   -    -]
#17  Foreground long   Completed                   -       0                 - [-   -    -]
#18  Foreground long   Completed                   -       0                 - [-   -    -]
#19  Foreground long   Completed                   -       0                 - [-   -    -]

root@BN-Storage[/]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
root@BN-Storage[/]# smartctl -a /dev/da45
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Hitachi
Product:              HDT721010SLA36SM
Revision:             4321
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Logical Unit id:      0x500605ba00894754
Serial number:        STF607MH3GESTK
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat May 11 17:09:01 2019 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        60 C

Manufactured in week 24 of year 2008
Specified cycle count over device lifetime:  65536
Accumulated start-stop cycles:  13
Read defect list: asked for grown list but didn't get it
Vendor (Seagate) cache information
  Blocks sent to initiator = 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        0

No self-tests have been logged

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

EDIT: I did notice that disk /dev/da45 did NOT have any self test results for the SMART information. I am currently running a long test manually on this drive to obtain SMART information. Will update post when test completes.

And as Dlavigne requested earlier:

Code:

root@BN-Storage[/]# zpool status
  pool: Primary-Pool-1
state: ONLINE
  scan: scrub repaired 0 in 0 days 00:07:37 with 0 errors on Mon May  6 21:21:31 2019
config:

        NAME                                            STATE     READ WRITE CKSUM
        Primary-Pool-1                                  ONLINE       0     0     0
          raidz3-0                                      ONLINE       0     0     0
            gptid/c29c8f87-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/df017fb6-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/e2f3fa5b-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/e7010090-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/eafba149-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/ef05a2fb-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/f305a1b5-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/f7037559-6c86-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0

errors: No known data errors

  pool: Primary-Pool-2
state: ONLINE
  scan: scrub repaired 0 in 0 days 00:05:02 with 0 errors on Mon May  6 21:19:09 2019
config:

        NAME                                            STATE     READ WRITE CKSUM
        Primary-Pool-2                                  ONLINE       0     0     0
          raidz3-0                                      ONLINE       0     0     0
            gptid/3965bf46-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/3d8129d3-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/419150ae-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/4596b0fd-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/49b8b81d-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/4df01c21-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/520f872a-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0
            gptid/5630dd24-6c87-11e9-89eb-5cb901e2ec18  ONLINE       0     0     0

errors: No known data errors

  pool: freenas-boot
state: ONLINE
  scan: scrub repaired 0 in 0 days 00:00:33 with 0 errors on Sun May  5 03:45:33 2019
config:

        NAME        STATE     READ WRITE CKSUM
        freenas-boot  ONLINE       0     0     0
          da48p2    ONLINE       0     0     0

errors: No known data errors
root@BN-Storage[/]#

Thank you for the timely responses!

j.bauman146318 · May 11, 2019

Redcoat, pointing me to the information provided by Mav has resolved my problems!!!! I have been able to import the previously lost pool and migrate things as needed in vmware! Thanks guys for your help :)

Redcoat · May 11, 2019

Well, that's excellent! I'm very pleased that your issue is resolved.

I turned up that thread with Mav's information with the forum's search function on your reported error string "GEOM: multipath/disk#: corrupt or invalid GPT detected. GEOM: multipath/disk#: GPT rejected - may not be recoverable."

"Search is your friend"

Please mark this thread "Solved".

j.bauman146318 · May 11, 2019

He He... I searched for how to solve a thread ;) Thanks again Redcoat!

Redcoat · May 11, 2019

Thanks!

Important Announcement for the TrueNAS Community.

SOLVED Lost power to disk array and 1 pool is no longer showing up... HELP PLEASE

j.bauman146318

Cadet

dlavigne

Guest

j.bauman146318

Cadet

j.bauman146318

Cadet

j.bauman146318

Cadet

j.bauman146318

Cadet

pro lamer

Guru

j.bauman146318

Cadet

Redcoat

MVP

j.bauman146318

Cadet

j.bauman146318

Cadet

Redcoat

MVP

j.bauman146318

Cadet

Redcoat

MVP

Similar threads