Irvin Daniel
Dabbler
- Joined
- Oct 14, 2013
- Messages
- 41
Hi all need some help with LACP:
so after hours of configuring I finally got my switch to work (CISCO 3750X).
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 6
Number of aggregators: 6
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
1 Po1(SU) LACP Gi1/0/4(P) Gi1/0/5(P) Gi1/0/6(P)
Gi1/0/14(P)
2 Po2(SD) -
3 Po3(SD) -
4 Po4(SD) -
5 Po5(SD) -
44 Po44(SD) -
Trinny-Networks#
Then I go into my nas an set up LACP manually then I see on the switch the ports go down then up. all lights are green. But I can not access my WEBGui from the Static IP address I set. the only way for me to access the nas is by setting up a crossover directly to one of my computers. Can someone point me in the right direction... On how to set up LACP
I am using Static can't use DHCP.....
so after hours of configuring I finally got my switch to work (CISCO 3750X).
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 6
Number of aggregators: 6
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
1 Po1(SU) LACP Gi1/0/4(P) Gi1/0/5(P) Gi1/0/6(P)
Gi1/0/14(P)
2 Po2(SD) -
3 Po3(SD) -
4 Po4(SD) -
5 Po5(SD) -
44 Po44(SD) -
Trinny-Networks#
Then I go into my nas an set up LACP manually then I see on the switch the ports go down then up. all lights are green. But I can not access my WEBGui from the Static IP address I set. the only way for me to access the nas is by setting up a crossover directly to one of my computers. Can someone point me in the right direction... On how to set up LACP
I am using Static can't use DHCP.....