TomWaller
Dabbler
- Joined
- Aug 15, 2013
- Messages
- 24
This is somewhat related to my previous post here:
www.truenas.com
Shared IP jails don’t seem to work through the GUI in TrueNAS. I can manually create jails with the same IP address on a secondary interface (Bridge associated with a VLAN) but for some reason when trying to configure this through the GUI I get an error stating the IP address is already in use in the system.
Is this a known issue with TrueNAS?
I’ve seen lots of advice on here about using VNET, but according to the iocage documentation, VNET is marked experimental, and Shared IP is the recommended approach.
Is anyone able to shed some light on this?
Can't get my head around jail and plugin networking.
Hey all. I have a TrueNAS server with 4 gigabit NICs in a lagg (lagg0). I use LACP, untagged trunk for native VLAN. This works. I also have two additional VLANs, 20 and 50. They are tagged and configured on the switch. I've configured the interfaces in TrueNAS like this: Physical ports ->...

Shared IP jails don’t seem to work through the GUI in TrueNAS. I can manually create jails with the same IP address on a secondary interface (Bridge associated with a VLAN) but for some reason when trying to configure this through the GUI I get an error stating the IP address is already in use in the system.
Is this a known issue with TrueNAS?
I’ve seen lots of advice on here about using VNET, but according to the iocage documentation, VNET is marked experimental, and Shared IP is the recommended approach.
Is anyone able to shed some light on this?