HP Microserver Issue with Bay 1

Status
Not open for further replies.

Norbert77

Cadet
Joined
Jan 18, 2015
Messages
1
I am currently experiencing an issue on two HP Microserver, one N36L and one N40L. Both are using internal bays with 4 WD RED with 3TB capacity. Both are running FreeNAS-9.3-STABLE-201501150211. And both are showing the same issue:

The drive in Bay 1 (and only in Bay 1 on both servers) is lost after a quite short uptime. After a reboot, the drive reappears and the ZFS state is shown as good. Zpool status shows the same as the webgui. In the log I am seeing the same issues as mentioned in BUG #7366:

(ada0:ahcich10:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich10:0:0:0): RES: 51 40 d0 80 6f 40 73 01 00 00 01

One drive has already been replaced by a new one, the issue reappeared directly on the new replaced drive. Changing the Bays results in reappearing of the issues on the drive in Bay 1 and not in Bay 2, so this possibly cannot be a hardware issue on the drive. Though the issue also exists on the second Microserver, also an issue on the shelf seems not to be the issue. Does anybody see the same behaviour on an HP Microserver?
 

joeschmuck

Old Man
Moderator
Joined
May 28, 2011
Messages
10,996
Submit a formal bug report (see link at top of forum page) and include your system specs and all the details you can.
 
Status
Not open for further replies.
Top