cobrakiller58
Guru
- Joined
- Jan 18, 2017
- Messages
- 525
I just purchase 4 HGST 8TB drives on sale at newegg and 3 out of the four are not being picked up and the fourth responds but it took a while to detect. I am seriously considering returning them all, my ST8000NM0055 had no problems in the same bays and my constellation ES.2 and ES.3 2TB were in the same bays backing up the server the previous day. I've tried moving the 3 unresponsive drives to different bays with zero improvement. Including the one bay that did detect the HGST all three still are unresponsive and the one that worked responds in every slot I placed it..... eventually. I'll try the three unresponsive ones in another machine to see if they even spin up after work today.
system specs are
Case: SuperMicro 847E16-R1400UB
Motherboard: SuperMicro X8DTU-F
CPU: 2 x Intel Xeon X5690
Ram: 96GB DDR3 ECC
Boot Drive: 2 x Transcend SSD370S 32GB
Storage Drive:6 x 8TB Seagate ST8000NM0055
LSI 9201-16i
Chelsio 10GBASE-CX4 S320E-CXA
FreeNas 11.0 U4
The drive that works shows the below message.
the other three display this on boot
The fourth drive currently DA6 is running a smart long test which claimed it would take 1083 minutes, any bright ideas? or should I cut my losses and return them and get drives I know work in my system?
system specs are
Case: SuperMicro 847E16-R1400UB
Motherboard: SuperMicro X8DTU-F
CPU: 2 x Intel Xeon X5690
Ram: 96GB DDR3 ECC
Boot Drive: 2 x Transcend SSD370S 32GB
Storage Drive:6 x 8TB Seagate ST8000NM0055
LSI 9201-16i
Chelsio 10GBASE-CX4 S320E-CXA
FreeNas 11.0 U4
Code:
sas2flash -listall LSI Corporation SAS2 Flash Utility Version 16.00.00.00 (2013.03.01) Copyright (c) 2008-2013 LSI Corporation. All rights reserved Adapter Selected is a LSI SAS: SAS2116_1(B1) Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr ---------------------------------------------------------------------------- 0 SAS2116_1(B1) 20.00.07.00 14.01.00.06 07.39.02.00 00:05:00:00 Finished Processing Commands Successfully. Exiting SAS2Flash. camcontrol devlist <LSI CORP SAS2X28 0717> at scbus0 target 16 lun 0 (pass0,ses0) <ATA ST8000NM0055-1RM SN02> at scbus0 target 18 lun 0 (pass1,da0) <ATA ST8000NM0055-1RM SN04> at scbus0 target 19 lun 0 (pass2,da1) <LSI SAS2X36 0e12> at scbus0 target 21 lun 0 (pass3,ses1) <ATA ST8000NM0055-1RM SN04> at scbus0 target 22 lun 0 (pass4,da2) <ATA ST8000NM0055-1RM SN04> at scbus0 target 23 lun 0 (pass5,da3) <ATA ST8000NM0055-1RM SN04> at scbus0 target 24 lun 0 (pass6,da4) <ATA ST8000NM0055-1RM SN04> at scbus0 target 25 lun 0 (pass7,da5) <ATA HGST HDN728080AL W91X> at scbus0 target 31 lun 0 (da6,pass8) <TS32GSSD370S O1225G> at scbus1 target 0 lun 0 (pass9,ada0) <TS32GSSD370S O1225G> at scbus2 target 0 lun 0 (pass10,ada1)
The drive that works shows the below message.
Code:
mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47 mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47 mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47 mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47 mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47 mps0: mpssas_ata_id_timeout checking ATA ID command 0xfffffe000167f240 sc 0xfffffe0001647000 mps0: ATA ID command timeout cm 0xfffffe000167f240 mpssas_get_sata_identify: request for page completed with error 0mps0: Sleeping 3 seconds after SATA ID error to wait for spinup mps0: mpssas_ata_id_timeout checking ATA ID command 0xfffffe000168f0e0 sc 0xfffffe0001647000 mps0: ATA ID command timeout cm 0xfffffe000168f0e0 mpssas_get_sata_identify: request for page completed with error 0mps0: Sleeping 3 seconds after SATA ID error to wait for spinup mps0: mpssas_ata_id_timeout checking ATA ID command 0xfffffe00016b77f0 sc 0xfffffe0001647000 mps0: ATA ID command timeout cm 0xfffffe00016b77f0 mpssas_get_sata_identify: request for page completed with error 0mps0: Sleeping 3 seconds after SATA ID error to wait for spinup mps0: mpssas_ata_id_timeout checking ATA ID command 0xfffffe00016bcbf0 sc 0xfffffe0001647000 mps0: ATA ID command timeout cm 0xfffffe00016bcbf0 mpssas_get_sata_identify: request for page completed with error 0mps0: Sleeping 3 seconds after SATA ID error to wait for spinup mps0: mpssas_ata_id_timeout checking ATA ID command 0xfffffe0001697ab0 sc 0xfffffe0001647000 mps0: ATA ID command timeout cm 0xfffffe0001697ab0 mpssas_get_sata_identify: request for page completed with error 0mps0: Sleeping 3 seconds after SATA ID error to wait for spinup mps0: mpssas_add_device: failed to get disk type (SSD or HDD) for SATA device with handle 0x0013 mps0: mpssas_add_device: sending Target Reset for stuck SATA identify command (cm = 0xfffffe000167f240) (noperiph:mps0:0:32:0): SMID 3 sending target reset mps0: mpssas_prepare_remove: Sending reset for target ID 32 (xpt0:mps0:0:32:ffffffff): SMID 3 recovery finished after target reset mps0: Unfreezing devq for target ID 32 mps0: Unfreezing devq for target ID 32 mps0: SAS Address for SATA device = 2d3d3d7496668369 mps0: SAS Address from SATA device = 2d3d3d7496668369 da6 at mps0 bus 0 scbus0 target 31 lun 0 da6: <ATA HGST HDN728080AL W91X> Fixed Direct Access SPC-4 SCSI device da6: Serial Number R6G0UD7Y da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 7630885MB (15628053168 512 byte sectors) ses1: da6,pass8: Element descriptor: 'Slot 04' ses1: da6,pass8: SAS Device Slot Element: 1 Phys at Slot 3 ses1: phy 0: SATA device ses1: phy 0: parent 50030480018eef3f addr 50030480018eef0f
the other three display this on boot
Code:
(probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 213 terminated ioc 804b scsi 0 state c xfer 0 (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 214 terminated ioc 804b scsi 0 state c xfer 0 (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:29:0): CAM status: CCB request completed with an error (probe1:mps0:0:29:0): Retrying command (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:30:0): CAM status: CCB request completed with an error (probe2:mps0:0:30:0): Retrying command (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 286 terminated ioc 804b scsi 0 state c xfer 0 (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 287 terminated ioc 804b scsi 0 state c xfer 0 (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:29:0): CAM status: CCB request completed with an error (probe1:mps0:0:29:0): Retrying command (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:30:0): CAM status: CCB request completed with an error (probe2:mps0:0:30:0): Retrying command (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 288 terminated ioc 804b scsi 0 state c xfer 0 (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 289 terminated ioc 804b scsi 0 state c xfer 0 (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:29:0): CAM status: CCB request completed with an error (probe1:mps0:0:29:0): Retrying command (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:30:0): CAM status: CCB request completed with an error (probe2:mps0:0:30:0): Retrying command (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 290 terminated ioc 804b scsi 0 state c xfer 0 (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 291 terminated ioc 804b scsi 0 state c xfer 0 (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:29:0): CAM status: CCB request completed with an error (probe1:mps0:0:29:0): Retrying command (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:30:0): CAM status: CCB request completed with an error (probe2:mps0:0:30:0): Retrying command (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 292 terminated ioc 804b scsi 0 state c xfer 0 (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 293 terminated ioc 804b scsi 0 state c xfer 0 (probe1:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:29:0): CAM status: CCB request completed with an error (probe1:mps0:0:29:0): Error 5, Retries exhausted (probe2:mps0:0:30:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:30:0): CAM status: CCB request completed with an error (probe2:mps0:0:30:0): Error 5, Retries exhausted ses0 at mps0 bus 0 scbus0 target 16 lun 0 ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device ses1 at mps0 bus 0 scbus0 target 21 lun 0 ses1: <LSI SAS2X36 0e12> Fixed Enclosure Services SPC-3 SCSI device ses1: Serial Number ses1: 600.000MB/s transfers ses1: Command Queueing enabled ses1: SCSI-3 ENC Device (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 126 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:28:0): CAM status: CCB request completed with an error (probe0:mps0:0:28:0): Retrying command (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 211 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:28:0): CAM status: CCB request completed with an error (probe0:mps0:0:28:0): Retrying command (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 300 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:28:0): CAM status: CCB request completed with an error (probe0:mps0:0:28:0): Retrying command (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 325 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:28:0): CAM status: CCB request completed with an error (probe0:mps0:0:28:0): Retrying command (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 410 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:28:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:28:0): CAM status: CCB request completed with an error (probe0:mps0:0:28:0): Error 5, Retries exhausted mps0: mpssas_prepare_remove: Sending reset for target ID 29 mps0: Unfreezing devq for target ID 29 mps0: SAS Address for SATA device = 92d59749666836a mps0: SAS Address from SATA device = 92d59749666836a (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 176 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:29:0): CAM status: CCB request completed with an error (probe0:mps0:0:29:0): Retrying command (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 185 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:29:0): CAM status: CCB request completed with an error (probe0:mps0:0:29:0): Retrying command (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 376 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:29:0): CAM status: CCB request completed with an error (probe0:mps0:0:29:0): Retrying command (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 378 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:29:0): CAM status: CCB request completed with an error (probe0:mps0:0:29:0): Retrying command (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 443 terminated ioc 804b scsi 0 state c xfer 0 (probe0:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:29:0): CAM status: CCB request completed with an error (probe0:mps0:0:29:0): Error 5, Retries exhausted
The fourth drive currently DA6 is running a smart long test which claimed it would take 1083 minutes, any bright ideas? or should I cut my losses and return them and get drives I know work in my system?