Hardware Specs and Fiber Card question

[smelsco]

I have a LAN-10G2DA-U-EMULEX fiber card in a QNAP that we are retiring. I want to put it in the box below but I can not find anywhere if it will work with FreeNAS. Can anyone help?

Also, these are the specs I have for my new NAS. Any thoughts/changes?
1. 4U 24-Bay 3.5” Storage Server Chassis with redundant power supply and 2x2.5” SSD Bays in the rear
2. Dual Socket server motherboard
3. Two Intel Xeon E5-2609 v2 4-Core 2.5 GHz CPUs
4. Total of 64G of memory
5. Two Intel S3500 300G SSD for OS configure in RAID-1
6. 16 of Seagate 2TB SATA HDDs
7. LSI PCI-E HBA with internal and external ports \\ The Internal port will connect to the system backplane to handle 24 drive bays and external can connect to another JBOD for daisy chain storage expansion in the future.

 

[Nindustries]

Just saying, running 2 SSD's in raid-1 for freenas is totally not needed. Freenas runs perfectly fine from a usb 2.0 memory stick; its loaded completely in memory. (Embedded install)

Save some money and ditch those SSD's!

- Sent from mobile.

 

[cyberjock]

+1 to ditch the SSDs. You can't even use the spare space over 2GB, so why would you buy such a large disk to start with?

 

[Nindustries]

Also, please do not post questions in the How-To section. This is for guides only.

 

[viniciusferrao]

Look if it's supported by FreeBSD, if it is, it should work on FreeNAS.

Have you tested it?

And please, use this SSD's as L2ARC or ZIL.