Phil Demand
Dabbler
- Joined
- Sep 13, 2013
- Messages
- 29
I've been running 9.1.1 for about three months with no problem at all. I shut down for some wiring changes (ran cat6, HDMI, USB over ethernet with adapters, and power underneath the floor) and when I booted up again I got this:
F1 FreeBSD
F2 FreeBSD
F5 Drive 1
F6 PXE
Boot: F2 ###############
And the # just keeps repeating. I have a Asrock FM2A85X Extreme6 with an AMD A4-4000 and 4gb of RAM. FreeNAS has been running on a USB stick that I've had on an internal USB header adapter. I have 4 2TB WD Red drives in raidz. Again, this has been running flawlessly for months, and now this.
Any help?
F1 FreeBSD
F2 FreeBSD
F5 Drive 1
F6 PXE
Boot: F2 ###############
And the # just keeps repeating. I have a Asrock FM2A85X Extreme6 with an AMD A4-4000 and 4gb of RAM. FreeNAS has been running on a USB stick that I've had on an internal USB header adapter. I have 4 2TB WD Red drives in raidz. Again, this has been running flawlessly for months, and now this.
Any help?