gabster
Explorer
- Joined
- May 17, 2016
- Messages
- 51
Hi Gang!
So, all of a sudden my freeNAS 9.10 box got really slow. Like reeeeaaaalllyy sloooowww (2 MB/sec!!). I used to get decent 110MB/s reads and writes with no issues. The box is new, 5x 3Tb raidZ, processor is 3.6Ghz, 16Gb ram. As I mentioned it ran fast.
I have a presumably Intel NIC in there with two ports.
Reading other posts, I did a ifconfig and here are the results:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLA
N_HWTSO>
ether 00:15:17:14:bb:6e
inet 10.0.0.3 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (10baseT/UTP <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLA
N_HWTSO>
ether 00:15:17:14:bb:6f
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Ah - and meant to tell you that all of a sudden I have a jail dataset I didn't create.
Any ideas where should I start?
Thanks
Gabi
So, all of a sudden my freeNAS 9.10 box got really slow. Like reeeeaaaalllyy sloooowww (2 MB/sec!!). I used to get decent 110MB/s reads and writes with no issues. The box is new, 5x 3Tb raidZ, processor is 3.6Ghz, 16Gb ram. As I mentioned it ran fast.
I have a presumably Intel NIC in there with two ports.
Reading other posts, I did a ifconfig and here are the results:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLA
N_HWTSO>
ether 00:15:17:14:bb:6e
inet 10.0.0.3 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (10baseT/UTP <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLA
N_HWTSO>
ether 00:15:17:14:bb:6f
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Ah - and meant to tell you that all of a sudden I have a jail dataset I didn't create.
Any ideas where should I start?
Thanks
Gabi
Last edited: