FreeNAS constantly losing connection to router after upgrade from 11.2U8 to 11.3U4.1

KBB

Cadet
Joined
Sep 25, 2020
Messages
9
FreeNAS Version 11.3U4.1
Hardware:
Motherboard: FATAL1TY ASRock AB350 Gaming-ITX/ac
CPU: AMD Ryzen 3 1200
RAM: 16GB 2x Kingston KVR24N17S8/8
PSU: Be Quiet 300w
Bootdrive: Intenso Top Performance SSD 128GB, m.2
Pool1: 3x WD Red 4TB
Pool2: Cruicial MX500 500GB

I upgraded my FreeNAS to 11.3 because of the 11.2 train reaching EOL and my bhyve VMs(Linux) doesn't work properly (can boot but VNC and SSH connection freezes after 1-15 seconds). After Upgrading my FreeNAS seems to working fine, but every day now I need to do a hard reset to get access to it because it loosing connection to the router (cant see my FreeNAS on my router or it's VMs or iocages).
I tried to find something in the log but I can't figure out what is wrong.
Code:
cat /var/log/messages
shows:

Code:
Sep 24 06:48:14 freenas kernel: epair2b: changing name to 'epair0b'
Sep 24 06:48:14 freenas kernel: vnet0.3: promiscuous mode enabled
Sep 24 06:48:14 freenas kernel: lo0: link state changed to UP
Sep 24 06:48:14 freenas kernel: lo0: link state changed to UP
Sep 24 06:52:16 freenas kernel: vnet0.3: link state changed to DOWN
Sep 24 06:52:16 freenas kernel: vnet0.3: link state changed to DOWN
Sep 24 06:52:16 freenas kernel: epair0b: link state changed to DOWN
Sep 24 06:52:16 freenas kernel: epair0b: link state changed to DOWN
Sep 24 06:52:16 freenas epair2a: Ethernet address: 02:88:d0:00:07:0a
Sep 24 06:52:16 freenas epair2b: Ethernet address: 02:c8:b5:00:08:0b
Sep 24 06:52:16 freenas kernel: epair2a: link state changed to UP
Sep 24 06:52:16 freenas kernel: epair2a: link state changed to UP
Sep 24 06:52:16 freenas kernel: epair2b: link state changed to UP
Sep 24 06:52:16 freenas kernel: epair2b: link state changed to UP
Sep 24 06:52:16 freenas kernel: epair2a: changing name to 'vnet0.4'
Sep 24 06:52:16 freenas kernel: epair2b: changing name to 'epair0b'
Sep 24 06:52:16 freenas kernel: vnet0.4: promiscuous mode enabled
Sep 24 06:52:16 freenas kernel: lo0: link state changed to UP
Sep 24 06:52:16 freenas kernel: lo0: link state changed to UP
Sep 24 06:52:19 freenas kernel: in6_purgeaddr: err=65, destination address delete failed
Sep 25 00:00:00 freenas syslog-ng[987]: Configuration reload request received, reloading configuration;
Sep 25 00:00:00 freenas syslog-ng[987]: Configuration reload finished;
Sep 25 08:25:31 freenas syslog-ng[984]: syslog-ng starting up; version='3.23.1'
Sep 25 08:25:31 freenas Copyright (c) 1992-2019 The FreeBSD Project.
Sep 25 08:25:31 freenas Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Sep 25 08:25:31 freenas     The Regents of the University of California. All rights reserved.
Sep 25 08:25:31 freenas FreeBSD is a registered trademark of The FreeBSD Foundation.
Sep 25 08:25:31 freenas FreeBSD 11.3-RELEASE-p11 #0 r325575+fb17f3e15b8(HEAD): Tue Jul 28 11:09:10 EDT 2020
Sep 25 08:25:31 freenas root@tnbuilds05.tn.ixsystems.net:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
Sep 25 08:25:31 freenas FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
Sep 25 08:25:31 freenas VT(vga): text 80x25
Sep 25 08:25:31 freenas CPU: AMD Ryzen 3 1200 Quad-Core Processor            (3094.28-MHz K8-class CPU)
Sep 25 08:25:31 freenas Origin="AuthenticAMD"  Id=0x800f11  Family=0x17  Model=0x1  Stepping=1
Sep 25 08:25:31 freenas Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Sep 25 08:25:31 freenas Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Sep 25 08:25:31 freenas AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
Sep 25 08:25:31 freenas AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Sep 25 08:25:31 freenas Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
Sep 25 08:25:31 freenas XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Sep 25 08:25:31 freenas AMD Extended Feature Extensions ID EBX=0x7<CLZERO,IRPerf,XSaveErPtr>
Sep 25 08:25:31 freenas SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
Sep 25 08:25:31 freenas TSC: P-state invariant, performance statistics
Sep 25 08:25:31 freenas real memory  = 17179869184 (16384 MB)
Sep 25 08:25:31 freenas avail memory = 16524460032 (15758 MB)
Sep 25 08:25:31 freenas Event timer "LAPIC" quality 600
Sep 25 08:25:31 freenas ACPI APIC Table: <ALASKA A M I >
Sep 25 08:25:31 freenas FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Sep 25 08:25:31 freenas FreeBSD/SMP: 1 package(s) x 4 core(s)
Sep 25 08:25:31 freenas WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Sep 25 08:25:31 freenas Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171214/tbfadt-796)
Sep 25 08:25:31 freenas ioapic0 <Version 2.1> irqs 0-23 on motherboard
Sep 25 08:25:31 freenas ioapic1 <Version 2.1> irqs 24-55 on motherboard
Sep 25 08:25:31 freenas SMP: AP CPU #3 Launched!
Sep 25 08:25:31 freenas SMP: AP CPU #1 Launched!
Sep 25 08:25:31 freenas SMP: AP CPU #2 Launched!
Sep 25 08:25:31 freenas Timecounter "TSC-low" frequency 1547138638 Hz quality 1000
Sep 25 08:25:31 freenas random: entropy device external interface
Sep 25 08:25:31 freenas random: registering fast source Intel Secure Key RNG
Sep 25 08:25:31 freenas random: fast provider: "Intel Secure Key RNG"
Sep 25 08:25:31 freenas kbd1 at kbdmux0
Sep 25 08:25:31 freenas mlx5en: Mellanox Ethernet driver 3.5.1 (April 2019)
Sep 25 08:25:31 freenas nexus0
Sep 25 08:25:31 freenas vtvga0: <VT VGA driver> on motherboard
Sep 25 08:25:31 freenas cryptosoft0: <software crypto> on motherboard
Sep 25 08:25:31 freenas aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
Sep 25 08:25:31 freenas padlock0: No ACE support.
Sep 25 08:25:31 freenas acpi0: <ALASKA A M I > on motherboard
Sep 25 08:25:31 freenas acpi0: Power Button (fixed)
Sep 25 08:25:31 freenas cpu0: <ACPI CPU> on acpi0
Sep 25 08:25:31 freenas cpu1: <ACPI CPU> on acpi0
Sep 25 08:25:31 freenas cpu2: <ACPI CPU> on acpi0
Sep 25 08:25:31 freenas cpu3: <ACPI CPU> on acpi0
Sep 25 08:25:31 freenas attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Sep 25 08:25:31 freenas Timecounter "i8254" frequency 1193182 Hz quality 0
Sep 25 08:25:31 freenas Event timer "i8254" frequency 1193182 Hz quality 100
Sep 25 08:25:31 freenas atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Sep 25 08:25:31 freenas atrtc0: registered as a time-of-day clock, resolution 1.000000s
Sep 25 08:25:31 freenas Event timer "RTC" frequency 32768 Hz quality 0
Sep 25 08:25:31 freenas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Sep 25 08:25:31 freenas Timecounter "HPET" frequency 14318180 Hz quality 950
Sep 25 08:25:31 freenas Event timer "HPET" frequency 14318180 Hz quality 450
Sep 25 08:25:31 freenas Event timer "HPET1" frequency 14318180 Hz quality 450
Sep 25 08:25:31 freenas Event timer "HPET2" frequency 14318180 Hz quality 450
Sep 25 08:25:31 freenas Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Sep 25 08:25:31 freenas acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Sep 25 08:25:31 freenas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Sep 25 08:25:31 freenas pcib0: _OSC returned error 0x10
Sep 25 08:25:31 freenas pci0: <ACPI PCI bus> on pcib0
Sep 25 08:25:31 freenas amdsmn0: <AMD Family 17h System Management Network> on hostb0
Sep 25 08:25:31 freenas amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
Sep 25 08:25:31 freenas pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
Sep 25 08:25:31 freenas pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
Sep 25 08:25:31 freenas pci1: <ACPI PCI bus> on pcib1
Sep 25 08:25:31 freenas xhci0: <AMD 300 Series USB 3.0 controller> mem 0xfe8a0000-0xfe8a7fff irq 32 at device 0.0 on pci1
Sep 25 08:25:31 freenas xhci0: 32 bytes context size, 64-bit DMA
Sep 25 08:25:31 freenas usbus0 on xhci0
Sep 25 08:25:31 freenas usbus0: 5.0Gbps Super Speed USB v3.0
Sep 25 08:25:31 freenas ahci0: <AMD 300 Series AHCI SATA controller> mem 0xfe880000-0xfe89ffff irq 33 at device 0.1 on pci1
Sep 25 08:25:31 freenas ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
Sep 25 08:25:31 freenas ahcich0: <AHCI channel> at channel 0 on ahci0
Sep 25 08:25:31 freenas ahcich1: <AHCI channel> at channel 1 on ahci0
Sep 25 08:25:31 freenas ahcich4: <AHCI channel> at channel 4 on ahci0
Sep 25 08:25:31 freenas ahcich5: <AHCI channel> at channel 5 on ahci0
Sep 25 08:25:31 freenas pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1
Sep 25 08:25:31 freenas pci2: <ACPI PCI bus> on pcib2
Sep 25 08:25:31 freenas pcib3: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci2
Sep 25 08:25:31 freenas pci3: <ACPI PCI bus> on pcib3
Sep 25 08:25:31 freenas pcib4: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci2
Sep 25 08:25:31 freenas pci4: <ACPI PCI bus> on pcib4
Sep 25 08:25:31 freenas pcib5: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2
Sep 25 08:25:31 freenas pci5: <ACPI PCI bus> on pcib5
Sep 25 08:25:31 freenas pcib6: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci2
Sep 25 08:25:31 freenas pci6: <ACPI PCI bus> on pcib6
Sep 25 08:25:31 freenas pcib7: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2
Sep 25 08:25:31 freenas pci7: <ACPI PCI bus> on pcib7
Sep 25 08:25:31 freenas pci7: <network> at device 0.0 (no driver attached)
Sep 25 08:25:31 freenas pcib8: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2
Sep 25 08:25:31 freenas pci8: <ACPI PCI bus> on pcib8
Sep 25 08:25:31 freenas igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xf000-0xf01f mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff irq 35 at device 0.0 on pci8
Sep 25 08:25:31 freenas igb0: Using MSIX interrupts with 3 vectors
Sep 25 08:25:31 freenas igb0: Ethernet address: 70:85:c2:5a:fb:67
Sep 25 08:25:31 freenas igb0: Bound queue 0 to cpu 0
Sep 25 08:25:31 freenas igb0: Bound queue 1 to cpu 1
Sep 25 08:25:31 freenas pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0
Sep 25 08:25:31 freenas pci9: <ACPI PCI bus> on pcib9
Sep 25 08:25:31 freenas pci9: <unknown> at device 0.0 (no driver attached)
Sep 25 08:25:31 freenas pci9: <encrypt/decrypt> at device 0.2 (no driver attached)
Sep 25 08:25:31 freenas xhci1: <AMD KERNCZ USB 3.0 controller> mem 0xfe300000-0xfe3fffff irq 37 at device 0.3 on pci9
Sep 25 08:25:31 freenas xhci1: 64 bytes context size, 64-bit DMA
Sep 25 08:25:31 freenas usbus1 on xhci1
Sep 25 08:25:31 freenas usbus1: 5.0Gbps Super Speed USB v3.0
Sep 25 08:25:31 freenas pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0
Sep 25 08:25:31 freenas pci10: <ACPI PCI bus> on pcib10
Sep 25 08:25:31 freenas pci10: <unknown> at device 0.0 (no driver attached)
Sep 25 08:25:31 freenas ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfe908000-0xfe908fff irq 42 at device 0.2 on pci10
Sep 25 08:25:31 freenas ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
Sep 25 08:25:31 freenas ahcich11: <AHCI channel> at channel 3 on ahci1
Sep 25 08:25:31 freenas pci10: <multimedia, HDA> at device 0.3 (no driver attached)
Sep 25 08:25:31 freenas isab0: <PCI-ISA bridge> at device 20.3 on pci0
Sep 25 08:25:31 freenas isa0: <ISA bus> on isab0
Sep 25 08:25:31 freenas acpi_button0: <Power Button> on acpi0
Sep 25 08:25:31 freenas uart2: <Non-standard ns8250 class UART with FIFOs> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
Sep 25 08:25:31 freenas uart3: <Non-standard ns8250 class UART with FIFOs> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
Sep 25 08:25:31 freenas uart4: <Non-standard ns8250 class UART with FIFOs> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0
Sep 25 08:25:31 freenas uart5: <Non-standard ns8250 class UART with FIFOs> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0
Sep 25 08:25:31 freenas wbwd0: <Nuvoton NCT6792 (0xc9/0x11) Watchdog Timer> at port 0x2e-0x2f on isa0
Sep 25 08:25:31 freenas amdsbwd0: <AMD FCH Rev 41h+ Watchdog Timer> at iomem 0xfed80b00-0xfed80b03,0xfed80b04-0xfed80b07 on isa0
Sep 25 08:25:31 freenas amdsbwd0: watchdog hardware is disabled
Sep 25 08:25:31 freenas device_attach: amdsbwd0 attach returned 6
Sep 25 08:25:31 freenas atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Sep 25 08:25:31 freenas atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep 25 08:25:31 freenas kbd0 at atkbd0
Sep 25 08:25:31 freenas atkbd0: [GIANT-LOCKED]
Sep 25 08:25:31 freenas hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Sep 25 08:25:31 freenas ZFS filesystem version: 5
Sep 25 08:25:31 freenas ZFS storage pool version: features support (5000)
Sep 25 08:25:31 freenas Timecounters tick every 1.000 msec
Sep 25 08:25:31 freenas freenas_sysctl: adding account.
Sep 25 08:25:31 freenas freenas_sysctl: adding directoryservice.
Sep 25 08:25:31 freenas freenas_sysctl: adding middlewared.
Sep 25 08:25:31 freenas freenas_sysctl: adding network.
Sep 25 08:25:31 freenas freenas_sysctl: adding services.
Sep 25 08:25:31 freenas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Sep 25 08:25:31 freenas ugen0.1: <0x1022 XHCI root HUB> at usbus0
Sep 25 08:25:31 freenas ugen1.1: <0x1022 XHCI root HUB> at usbus1
Sep 25 08:25:31 freenas uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Sep 25 08:25:31 freenas uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
Sep 25 08:25:31 freenas uhub1: 8 ports with 8 removable, self powered
Sep 25 08:25:31 freenas uhub0: 22 ports with 22 removable, self powered
Sep 25 08:25:31 freenas ugen0.2: <vendor 0x8087 product 0x0aa7> at usbus0
Sep 25 08:25:31 freenas ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Sep 25 08:25:31 freenas ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 25 08:25:31 freenas ada0: Serial Number WD-WCC7K5AE6KK0
Sep 25 08:25:31 freenas ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Sep 25 08:25:31 freenas ada0: Command Queueing enabled
Sep 25 08:25:31 freenas ada0: 3815447MB (7814037168 512 byte sectors)
Sep 25 08:25:31 freenas ada0: quirks=0x1<4K>
Sep 25 08:25:31 freenas ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Sep 25 08:25:31 freenas ada1: <CT500MX500SSD1 M3CR020> ACS-3 ATA SATA 3.x device
Sep 25 08:25:31 freenas ada1: Serial Number 1826E1466EDA
Sep 25 08:25:31 freenas ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
Sep 25 08:25:31 freenas ada1: Command Queueing enabled
Sep 25 08:25:31 freenas ada1: 476940MB (976773168 512 byte sectors)
Sep 25 08:25:31 freenas ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
Sep 25 08:25:31 freenas ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 25 08:25:31 freenas ada2: Serial Number WD-WCC7K6DJD717
Sep 25 08:25:31 freenas ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Sep 25 08:25:31 freenas ada2: Command Queueing enabled
Sep 25 08:25:31 freenas ada2: 3815447MB (7814037168 512 byte sectors)
Sep 25 08:25:31 freenas ada2: quirks=0x1<4K>
Sep 25 08:25:31 freenas ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
Sep 25 08:25:31 freenas ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 25 08:25:31 freenas ada3: Serial Number WD-WCC7K6LV5XJ1
Sep 25 08:25:31 freenas ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Sep 25 08:25:31 freenas ada3: Command Queueing enabled
Sep 25 08:25:31 freenas ada3: 3815447MB (7814037168 512 byte sectors)
Sep 25 08:25:31 freenas ada3: quirks=0x1<4K>
Sep 25 08:25:31 freenas ada4 at ahcich11 bus 0 scbus4 target 0 lun 0
Sep 25 08:25:31 freenas ada4: <Intenso SSD P1228BS> ACS-2 ATA SATA 3.x device
Sep 25 08:25:31 freenas ada4: Serial Number 3832430-531710001
Sep 25 08:25:31 freenas ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
Sep 25 08:25:31 freenas ada4: Command Queueing enabled
Sep 25 08:25:31 freenas ada4: 122104MB (250069680 512 byte sectors)
Sep 25 08:25:31 freenas random: unblocking device.
Sep 25 08:25:31 freenas Trying to mount root from zfs:freenas-boot/ROOT/11.3-U4.1 []...
Sep 25 08:25:31 freenas kernel: lo0: link state changed to UP
Sep 25 08:25:31 freenas kernel: lo0: link state changed to UP
Sep 25 08:25:31 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:31 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:31 freenas GEOM_ELI: Device ada1p1.eli created.
Sep 25 08:25:31 freenas GEOM_ELI: Encryption: AES-XTS 128
Sep 25 08:25:31 freenas GEOM_ELI:     Crypto: hardware
Sep 25 08:25:31 freenas GEOM_MIRROR: Device mirror/swap0 launched (2/2).
Sep 25 08:25:31 freenas GEOM_ELI: Device mirror/swap0.eli created.
Sep 25 08:25:31 freenas GEOM_ELI: Encryption: AES-XTS 128
Sep 25 08:25:31 freenas GEOM_ELI:     Crypto: hardware
Sep 25 08:25:31 freenas GEOM_ELI: Device ada1p1.eli destroyed.
Sep 25 08:25:31 freenas GEOM_MIRROR: Device mirror/swap1 launched (2/2).
Sep 25 08:25:31 freenas GEOM_ELI: Device mirror/swap1.eli created.
Sep 25 08:25:31 freenas GEOM_ELI: Encryption: AES-XTS 128
Sep 25 08:25:31 freenas GEOM_ELI:     Crypto: hardware
Sep 25 08:25:31 freenas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> F17H/6/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Sep 25 08:25:31 freenas kernel: igb0: link state changed to DOWN
Sep 25 08:25:31 freenas kernel: igb0: link state changed to DOWN
Sep 25 08:25:31 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:31 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:32 freenas CPU: AMD Ryzen 3 1200 Quad-Core Processor            (3094.28-MHz K8-class CPU)
Sep 25 08:25:32 freenas Origin="AuthenticAMD"  Id=0x800f11  Family=0x17  Model=0x1  Stepping=1
Sep 25 08:25:32 freenas Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Sep 25 08:25:32 freenas Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Sep 25 08:25:32 freenas AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
Sep 25 08:25:32 freenas AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Sep 25 08:25:32 freenas Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
Sep 25 08:25:32 freenas XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Sep 25 08:25:32 freenas AMD Extended Feature Extensions ID EBX=0x7<CLZERO,IRPerf,XSaveErPtr>
Sep 25 08:25:32 freenas SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
Sep 25 08:25:32 freenas TSC: P-state invariant, performance statistics
Sep 25 08:25:32 freenas ntpd[1171]: ntpd 4.2.8p12-a (1): Starting
Sep 25 08:25:32 freenas ntpd[1171]: Command line: /usr/sbin/ntpd -g -c /etc/ntp.conf -p /var/run/ntpd.pid -f /var/db/ntpd.drift
Sep 25 08:25:32 freenas ntpd[1171]: ----------------------------------------------------
Sep 25 08:25:32 freenas ntpd[1171]: ntp-4 is maintained by Network Time Foundation,
Sep 25 08:25:32 freenas ntpd[1171]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Sep 25 08:25:32 freenas ntpd[1171]: corporation.  Support and training for ntp-4 are
Sep 25 08:25:32 freenas ntpd[1171]: available at https://www.nwtime.org/support
Sep 25 08:25:32 freenas ntpd[1171]: ----------------------------------------------------
Sep 25 08:25:39 freenas tap0: Ethernet address: 00:bd:03:d3:f7:00
Sep 25 08:25:39 freenas bridge0: Ethernet address: 02:0f:b5:c6:7c:00
Sep 25 08:25:39 freenas kernel: bridge0: link state changed to DOWN
Sep 25 08:25:39 freenas kernel: bridge0: link state changed to DOWN
Sep 25 08:25:39 freenas kernel: tap0: promiscuous mode enabled
Sep 25 08:25:39 freenas kernel: igb0: link state changed to DOWN
Sep 25 08:25:39 freenas kernel: igb0: link state changed to DOWN
Sep 25 08:25:39 freenas kernel: igb0: promiscuous mode enabled
Sep 25 08:25:39 freenas kernel: tap0: link state changed to UP
Sep 25 08:25:39 freenas kernel: tap0: link state changed to UP
Sep 25 08:25:39 freenas kernel: bridge0: link state changed to UP
Sep 25 08:25:39 freenas kernel: bridge0: link state changed to UP
Sep 25 08:25:40 freenas epair0a: Ethernet address: 02:88:d0:00:05:0a
Sep 25 08:25:40 freenas epair0b: Ethernet address: 02:c8:b5:00:06:0b
Sep 25 08:25:40 freenas kernel: epair0a: link state changed to UP
Sep 25 08:25:40 freenas kernel: epair0a: link state changed to UP
Sep 25 08:25:40 freenas kernel: epair0b: link state changed to UP
Sep 25 08:25:40 freenas kernel: epair0b: link state changed to UP
Sep 25 08:25:40 freenas kernel: epair0a: changing name to 'vnet0.1'
Sep 25 08:25:40 freenas kernel: vnet0.1: promiscuous mode enabled
Sep 25 08:25:41 freenas kernel: lo0: link state changed to UP
Sep 25 08:25:41 freenas kernel: lo0: link state changed to UP
Sep 25 08:25:43 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:43 freenas kernel: igb0: link state changed to UP
Sep 25 08:25:44 freenas epair1a: Ethernet address: 02:88:d0:00:06:0a
Sep 25 08:25:44 freenas epair1b: Ethernet address: 02:c8:b5:00:07:0b
Sep 25 08:25:44 freenas kernel: epair1a: link state changed to UP
Sep 25 08:25:44 freenas kernel: epair1a: link state changed to UP
Sep 25 08:25:44 freenas kernel: epair1b: link state changed to UP
Sep 25 08:25:44 freenas kernel: epair1b: link state changed to UP
Sep 25 08:25:44 freenas kernel: epair1a: changing name to 'vnet0.2'
Sep 25 08:25:44 freenas kernel: epair1b: changing name to 'epair0b'
Sep 25 08:25:44 freenas kernel: vnet0.2: promiscuous mode enabled
Sep 25 08:25:44 freenas kernel: lo0: link state changed to UP
Sep 25 08:25:44 freenas kernel: lo0: link state changed to UP
Sep 25 08:26:10 freenas dhclient: New IP Address (igb0): 192.168.1.116
Sep 25 08:26:10 freenas dhclient: New Subnet Mask (igb0): 255.255.255.0
Sep 25 08:26:10 freenas dhclient: New Broadcast Address (igb0): 192.168.1.255
Sep 25 08:26:10 freenas dhclient: New Routers (igb0): 192.168.1.1


Code:
ifconfig -a




Code:
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: igb0
        options=2400b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,RXCSUM_IPV6>
        ether 70:85:c2:5a:fb:67
        hwaddr 70:85:c2:5a:fb:67
        inet 192.168.1.116 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: Attached to Ark_Server
        options=80000<LINKSTATE>
        ether 00:bd:03:d3:f7:00
        hwaddr 00:bd:03:d3:f7:00
        nd6 options=1<PERFORMNUD>
        media: Ethernet autoselect
        status: active
        groups: tap
        Opened by PID 1779
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:0f:b5:c6:7c:00
        nd6 options=1<PERFORMNUD>
        groups: bridge
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: vnet0.2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 6 priority 128 path cost 2000
        member: vnet0.1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 5 priority 128 path cost 2000
        member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 1 priority 128 path cost 20000
        member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 3 priority 128 path cost 2000000
vnet0.1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: Teamspeak3 as nic: epair0b
        options=8<VLAN_MTU>
        ether 70:85:c2:45:f8:5d
        hwaddr 02:88:d0:00:05:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0.2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: nextcloud as nic: epair0b
        options==8<VLAN_MTU>
        ether 70:85:c2:ba:b5:81
        hwaddr 02:88:d0:00:06:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair


Thanks for any feedback.
 

Alecmascot

Guru
Joined
Mar 18, 2014
Messages
1,177
FYI:
 

KBB

Cadet
Joined
Sep 25, 2020
Messages
9
Thanks for the quick answer didn't expect that Zen is still a big problem.
 

hba

Dabbler
Joined
Sep 18, 2020
Messages
10
After updating from 11.2 to 11.3 FreeNAS can't keep the connection for even a day. Is there any way to downgrade to vers. 11.2?
 

Redcoat

MVP
Joined
Feb 18, 2014
Messages
2,925
Is there any way to downgrade to vers. 11.2?
Go to System>Boot - Select the 11.2 entry in the list, click the three dots at the RHS of the line and select "Activate". Reboot into the activated selection.
 

hba

Dabbler
Joined
Sep 18, 2020
Messages
10
Go to System>Boot - Select the 11.2 entry in the list, click the three dots at the RHS of the line and select "Activate". Reboot into the activated selection.
Thanks Redcoat. Now, in 11.2, I get the following error:
1601809779704.png

My pool, Netdisk, is now seemingly unknown. Is there a way to solve this?
 

Redcoat

MVP
Joined
Feb 18, 2014
Messages
2,925
I can't work this problem at this time - prior commitments in the way - but I see that there are lots of postings dealing with seemingly similar problems - like this one, for instance: https://www.ixsystems.com/community...l-state-is-unknown-after-power-failure.78047/

I suggest that you look at that and also use the search function for "pool unknown" and take a look at the posts it turns up for ideas on investigating the situation.

You might want to start another thread as the title of this one doesn't tell much about your situation. If/when you do so, I suggest you provide full information as requested in the Forum Rules on the masthead.
 
Top