Hi,
I have two USB drives as my boot drives. I received this error below. Should I do a Zpoolclear? What is the proper way to do it from shell?
Thanks,
Rich
I have two USB drives as my boot drives. I received this error below. Should I do a Zpoolclear? What is the proper way to do it from shell?
Thanks,
Rich
Code:
Checking status of zfs pools: NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT freenas-boot 14.5G 5.33G 9.17G - - 36% 1.00x ONLINE - pool: freenas-boot state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 0 in 0h30m with 0 errors on Tue May 16 04:15:04 2017 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/04c83e56-cb5e-11e5-b076-0cc47a6be4a4 ONLINE 0 0 1 gptid/0525dfcb-cb5e-11e5-b076-0cc47a6be4a4 ONLINE 0 0 0 errors: No known data errors -- End of daily output --