Freenas 9.10 + HP Dl380 G8 + HP H220 SAS Controller SCSI Errors

[Konstantin]

Good evening everyone,

Installed a fresh copy of Freenas 9.10.
I'm receiving this error from all disks: SCSI sense: UNIT ATTENTION (Power on, reset, or bus device reset occurred)

When I enter GUI it shows me something like "Your driver version is 15, update to P20 IT".

The latest version from HP SPP is 15....

Any ideas how to fix this? Or that's fine to work with this error?

 

[Konstantin]

Also it' showing me these errors for all drives...May be cable?

• CRITICAL: May 9, 2016, 12:36 a.m. - Device: /dev/da10 [SAT], ATA error count increased from 132 to 136
• CRITICAL: May 9, 2016, 12:36 a.m. - Device: /dev/da11 [SAT], ATA error count increased from 133 to 134
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da2 [SAT], ATA error count increased from 207 to 209
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da3 [SAT], ATA error count increased from 207 to 209
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da0 [SAT], ATA error count increased from 238 to 249
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da1 [SAT], ATA error count increased from 241 to 246
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da6 [SAT], ATA error count increased from 203 to 204
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da7 [SAT], ATA error count increased from 214 to 218
• CRITICAL: May 9, 2016, 12:05 a.m. - Device: /dev/da4 [SAT], ATA error count increased from 202 to 207

 

[Konstantin]

Eventually I flashed my controller with AVAGO P20, No any alerts in GUI, but on boot up FreeNAS shows this for all drives

(da4:mps0:0:12:0): CAM status: SCSI Status Error
(da4:mps0:0:12:0): SCSI status: Check Condition
(da4:mps0:0:12:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC
error detected)
(da4:mps0:0:12:0): Retrying command (per sense data)
(da5:mps0:0:13:0): READ(10). CDB: 28 00 �� e0 85 00 00 01 00 00
(da5:mps0:0:13:0): CAM status: SCSI Stat�� Error
(da5:mps0:0:13:0): SCSI status: Check Condition
(da5:mps0:0:13:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC
error detected)
(da5:mps0:0:13:0): Retrying command (per sense data)
(da7:mps0:0:15:0): READ(10). CDB: 28 00 00 00 03 00 00 01 00 00
(da7:mps0:0:15:0): CAM status: SCSI Status Error
(da7:mps0:0:15:0): SCSI status: Check Condition
(da7:mps0:0:15:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC

 

[cyberjock]

You have cabling issues. Replace the data cables.

 

[Konstantin]

And again errors:

• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da3 [SAT], ATA error count increased from 224 to 225
• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da1 [SAT], ATA error count increased from 294 to 295
• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da6 [SAT], ATA error count increased from 219 to 220
• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da7 [SAT], ATA error count increased from 238 to 240
• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da4 [SAT], ATA error count increased from 234 to 236
• CRITICAL: May 10, 2016, 10:48 a.m. - Device: /dev/da5 [SAT], ATA error count increased from 221 to 222

 

[Konstantin]

Looks like....Ordered a new one. Thanks