FreeNAS 8.0 Will Not See Disk

[mrwillz]

I successfully upgraded from 7.2 to the 8.0. I was able to import my zpool using zpool import then upgrade my zpool to the latest version using zpool upgrade. The only issue I ran into is that in 7.2 I had a single drive leftover that was formatted using a UFS filesystem that I used as a drive for junk data. For some reason 8.0 is not seeing that drive. It sees the 3 ZFS formatted drives but not the drive I had formatted using UFS. I have checked the log files and see no references to that disk at all. I only see ada0 - ada2. I know this disk is good because I can see it in the BIOS and from other operating systems.

Disk Model: ST3160318AS Seagate Barracuda 7200 RPM 160GB

Thanks in advance.

 

[TwinDaddyKev]

I didn't know you can upgrade from 7.2 to 8.0. That's great to hear.
If the last drive is only for junk data, you can take it out and delete all the partitions on it and see if FN8 sees it.