Dell PowerEdge r610
LSI SAS9207-8e in IT mode
Dell PowerVault MD1000 (unified mode)
10x HGST 6TB
4x WD Black 1TB
At the beginning of the year, I was having no issues. I was running 4x 6TB & 4x 1TB drives in the powervault. The 6TB were in bays 0/1/2/3 with the 1TB in 11/12/13/14.
I purchased 6 more 6TB drives. It seems after these drives were added, I starting having issues. I created a new pool with the 6 drives, and added the 4 old drives to the pool. During the resilvering process while adding each drive, I had mpt driver resets constantly, eventually causing the system to reboot unexpectedly. I eventually got all the drives added.
Now when doing the weekly scrub the system reboots during the scrub.
Up until yesterday, I had a different HBA (still used the mpt driver). I replaced the HBA thinking that it was a hardware error. Replacing the HBA made no improvement.
LSI SAS9207-8e in IT mode
Dell PowerVault MD1000 (unified mode)
10x HGST 6TB
4x WD Black 1TB
At the beginning of the year, I was having no issues. I was running 4x 6TB & 4x 1TB drives in the powervault. The 6TB were in bays 0/1/2/3 with the 1TB in 11/12/13/14.
I purchased 6 more 6TB drives. It seems after these drives were added, I starting having issues. I created a new pool with the 6 drives, and added the 4 old drives to the pool. During the resilvering process while adding each drive, I had mpt driver resets constantly, eventually causing the system to reboot unexpectedly. I eventually got all the drives added.
Now when doing the weekly scrub the system reboots during the scrub.
Up until yesterday, I had a different HBA (still used the mpt driver). I replaced the HBA thinking that it was a hardware error. Replacing the HBA made no improvement.