Today try to use the new release.Found that the system can not be on my device.Carried out to: "acpi0: <GBT GBTUACPI> on motherboard" after stuck.Uncertain whether the crash, but more than an hour without action can only be forced to restart.
Try the following version:
FreeNAS-8.3.1-RELEASE-p2-x64.img.xz
FreeNAS-8.3.1-RELEASE-p1-x64.img.xz
FreeNAS-8.3.1-RELEASE-x64.img.xz
But no such problem in the RC1 version.
Also try to replace the U-disk and TF card, the result is the same.
My hardware configuration is as follows:
intel E3200
Gigabyte P35-S3G
3GB RAM
Two Seagate Green 2.0TB
No graphics card(use the serial port)
Try the following version:
FreeNAS-8.3.1-RELEASE-p2-x64.img.xz
FreeNAS-8.3.1-RELEASE-p1-x64.img.xz
FreeNAS-8.3.1-RELEASE-x64.img.xz
But no such problem in the RC1 version.
Also try to replace the U-disk and TF card, the result is the same.
My hardware configuration is as follows:
intel E3200
Gigabyte P35-S3G
3GB RAM
Two Seagate Green 2.0TB
No graphics card(use the serial port)