I am trying to get a centos vm running with iohyve.
I saw that iohyve got updated in 9.10.2 and decided to try it out again.
I am using a lagg with LACP, and vlan interfaces on top.
So I setup iohyve to use vlan100.
Here is my ifconfig, as you can see I i also have jails running, but directly on the vlan100 interface.
Code:
freenas# ifconfig
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: connected to core01 (gi21)
options=a8<VLAN_MTU,JUMBO_MTU,VLAN_HWCSUM>
ether 9c:5c:8e:4e:d5:7d
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: connected to core01 (gi22)
options=a8<VLAN_MTU,JUMBO_MTU,VLAN_HWCSUM>
ether 9c:5c:8e:4e:d5:7d
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb2: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 9c:5c:8e:4e:d5:7f
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
igb3: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 9c:5c:8e:4e:d5:80
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=a8<VLAN_MTU,JUMBO_MTU,VLAN_HWCSUM>
ether 9c:5c:8e:4e:d5:7d
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
laggproto lacp lagghash l2,l3,l4
laggport: igb0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: igb1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
vlan100: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 9c:5c:8e:4e:d5:7d
inet 192.168.109.11 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.15 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.17 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.18 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.158 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.19 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.16 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.13 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.12 netmask 0xffffff00 broadcast 192.168.109.255
inet 192.168.109.14 netmask 0xffffff00 broadcast 192.168.109.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
vlan: 100 parent interface: lagg0
vlan101: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 9c:5c:8e:4e:d5:7d
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
vlan: 101 parent interface: lagg0
vlan102: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 9c:5c:8e:4e:d5:7d
inet 10.32.2.2 netmask 0xffffff00 broadcast 10.32.2.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
vlan: 102 parent interface: lagg0
vlan103: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 9c:5c:8e:4e:d5:7d
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
vlan: 103 parent interface: lagg0
tap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: iohyve-centos7
options=80000<LINKSTATE>
ether 00:bd:b8:55:6d:01
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: iohyve-bridge
ether 02:2a:c5:08:de:00
nd6 options=1<PERFORMNUD>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 13 priority 128 path cost 2000000
member: vlan100 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 7 priority 128 path cost 2000000
tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: iohyve-centos-freeipa
options=80000<LINKSTATE>
ether 00:bd:47:3d:6a:00
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
freenas# iohyve version
iohyve v0.7.7 2016/11/10 I Think I'll Go for a Walk Edition
EDIT: running iohyve setup with the vlan100 interface solved this.