tomdavison
Cadet
- Joined
- Dec 17, 2014
- Messages
- 1
Hello, I didn't have two USB drives for boot when I installed. Now from the boot status view, I select 'stripe' and click 'attach'. The second drive is present in the pick list, but i get the following error:
dmesg
Debug/ixdiagnose attached.
FreeNAS version: FreeNAS 9.3.-STABLE-201412142326
Hardware: DELL C2100 - http://www.dell.com/us/business/p/poweredge-c2100/pd
Motherboard: Intel 5500
CPU: 2x L5630
RAM: 4x 8GB Samsung ECC... ill open it up and get the model if this is actually a ram issue
HD: 3x WD GREEN 4TB WD40EZRX. Single parity stripe
Add-On cards: PERC H200
Error: Failed to attach disk: cannot attach da3p2 to gptid/c38c7397-85d2-11e4-959e-60eb69ba6b4c: no such device in pool
dmesg
Code:
Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p5 #0 3b4abc3: Sun Dec 14 12:56:11 PST 2014 root@build3.ixsystems.com:/tank/home/jkh/build/93/FN/objs/os-base/amd64/fusion/jkh/93/FN/FreeBSD/src/sys/FREENAS.amd64 amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz (2133.45-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206c2 Family = 0x6 Model = 0x2c Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 35433480192 (33792 MB) avail memory = 33141903360 (31606 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <092010 APIC1715> FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 18 cpu5 (AP): APIC ID: 19 cpu6 (AP): APIC ID: 20 cpu7 (AP): APIC ID: 21 cpu8 (AP): APIC ID: 32 cpu9 (AP): APIC ID: 33 cpu10 (AP): APIC ID: 34 cpu11 (AP): APIC ID: 35 cpu12 (AP): APIC ID: 50 cpu13 (AP): APIC ID: 51 cpu14 (AP): APIC ID: 52 cpu15 (AP): APIC ID: 53 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0: Changing APIC ID to 6 ioapic1: Changing APIC ID to 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ispfw: registered firmware <isp_1040> ispfw: registered firmware <isp_1040_it> ispfw: registered firmware <isp_1080> ispfw: registered firmware <isp_1080_it> ispfw: registered firmware <isp_12160> ispfw: registered firmware <isp_12160_it> ispfw: registered firmware <isp_2100> ispfw: registered firmware <isp_2200> ispfw: registered firmware <isp_2300> ispfw: registered firmware <isp_2322> ispfw: registered firmware <isp_2400> ispfw: registered firmware <isp_2400_multi> ispfw: registered firmware <isp_2500> ispfw: registered firmware <isp_2500_multi> kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS> on motherboard padlock0: No ACE support. acpi0: <092010 XSDT1715> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0x27, should be 0x24 (20111123/tbutils-290) cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 cpu12: <ACPI CPU> on acpi0 cpu13: <ACPI CPU> on acpi0 cpu14: <ACPI CPU> on acpi0 cpu15: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 mps0: <LSI SAS2008> port 0xc000-0xc0ff mem 0xdf4b0000-0xdf4bffff,0xdf4c0000-0xdf4fffff irq 30 at device 0.0 on pci4 mps0: Firmware: 07.15.08.00, Driver: 16.00.00.00-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xbc00-0xbc1f irq 23 at device 26.0 on pci0 uhci0: LegSup = 0x2400 usbus0 on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 22 at device 26.1 on pci0 uhci1: LegSup = 0x2400 usbus1 on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb800-0xb81f irq 21 at device 26.2 on pci0 uhci2: LegSup = 0x2400 usbus2 on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xdf3de000-0xdf3de3ff irq 20 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci6: <ACPI PCI bus> on pcib6 igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xdc00-0xdc1f mem 0xdf6e0000-0xdf6fffff,0xdf6c0000-0xdf6dffff,0xdf69c000-0xdf69ffff irq 16 at device 0.0 on pci6 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 60:eb:69:ba:6b:4c igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd880-0xd89f mem 0xdf660000-0xdf67ffff,0xdf640000-0xdf65ffff,0xdf61c000-0xdf61ffff irq 17 at device 0.1 on pci6 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 60:eb:69:ba:6b:4d igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 12 igb1: Bound queue 5 to cpu 13 igb1: Bound queue 6 to cpu 14 igb1: Bound queue 7 to cpu 15 uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb480-0xb49f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2400 usbus4 on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 22 at device 29.1 on pci0 uhci4: LegSup = 0x2400 usbus5 on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xac00-0xac1f irq 21 at device 29.2 on pci0 uhci5: LegSup = 0x2400 usbus6 on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xdf3dc000-0xdf3dc3ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xdf800000-0xdfffffff,0xdf7e0000-0xdf7fffff irq 16 at device 11.0 on pci7 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH10 SATA300 controller> port 0xa880-0xa887,0xa800-0xa803,0xa480-0xa487,0xa400-0xa403,0xa080-0xa08f,0xa000-0xa00f irq 18 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atapci1: <Intel ICH10 SATA300 controller> port 0x9880-0x9887,0x9800-0x9803,0x9480-0x9487,0x9400-0x9403,0x9080-0x908f,0x9000-0x900f irq 19 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 qpi0: <QPI system bus> on motherboard pcib8: <QPI Host-PCI bridge> pcibus 255 on qpi0 pci255: <PCI bus> on pcib8 pcib9: <QPI Host-PCI bridge> pcibus 254 on qpi0 pci254: <PCI bus> on pcib9 ichwd0 on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 wbwd0: <Winbond 83627DHG IC ver. 5> at port 0x2e-0x2f on isa0 ichwd0 at port 0x830-0x837,0x860-0x87f on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: CGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 coretemp8: <CPU On-Die Thermal Sensors> on cpu8 est8: <Enhanced SpeedStep Frequency Control> on cpu8 p4tcc8: <CPU Frequency Thermal Control> on cpu8 coretemp9: <CPU On-Die Thermal Sensors> on cpu9 est9: <Enhanced SpeedStep Frequency Control> on cpu9 p4tcc9: <CPU Frequency Thermal Control> on cpu9 coretemp10: <CPU On-Die Thermal Sensors> on cpu10 est10: <Enhanced SpeedStep Frequency Control> on cpu10 p4tcc10: <CPU Frequency Thermal Control> on cpu10 coretemp11: <CPU On-Die Thermal Sensors> on cpu11 est11: <Enhanced SpeedStep Frequency Control> on cpu11 p4tcc11: <CPU Frequency Thermal Control> on cpu11 coretemp12: <CPU On-Die Thermal Sensors> on cpu12 est12: <Enhanced SpeedStep Frequency Control> on cpu12 p4tcc12: <CPU Frequency Thermal Control> on cpu12 coretemp13: <CPU On-Die Thermal Sensors> on cpu13 est13: <Enhanced SpeedStep Frequency Control> on cpu13 p4tcc13: <CPU Frequency Thermal Control> on cpu13 coretemp14: <CPU On-Die Thermal Sensors> on cpu14 est14: <Enhanced SpeedStep Frequency Control> on cpu14 p4tcc14: <CPU Frequency Thermal Control> on cpu14 coretemp15: <CPU On-Die Thermal Sensors> on cpu15 est15: <Enhanced SpeedStep Frequency Control> on cpu15 p4tcc15: <CPU Frequency Thermal Control> on cpu15 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled DUMMYNET 0xfffffe0005e4f040 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered failure at /fusion/jkh/93/FN/FreeBSD/src/sys/dev/mps/mps_sas_lsi.c:667/mpssas_add_device()! Could not get ID for device with handle 0x0009 mpssas_fw_work: failed to add device with handle 0x9 ugen3.2: <Avocent> at usbus3 ukbd0: <Keyboard> on usbus3 kbd2 at ukbd0 ums0: <Mouse> on usbus3 ums0: 3 buttons and [Z] coordinates ID=0 ums1: <Mouse REL> on usbus3 ums1: 3 buttons and [XYZ] coordinates ID=0 ugen7.2: <SanDisk> at usbus7 umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 2> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:6:0:-1: Attached to scbus6 ugen7.3: <SanDisk> at usbus7 umass1: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 3> on usbus7 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:7:1:-1: Attached to scbus7 da0 at mps0 bus 0 scbus0 target 3 lun 0 da0: <ATA WDC WD40EZRX-00S 0A80> Fixed Direct Access SCSI-5 device da0: Serial Number WD-WCC4E4CL824N da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) da0: quirks=0x8<4K> da1 at mps0 bus 0 scbus0 target 6 lun 0 da1: <ATA WDC WD40EZRX-00S 0A80> Fixed Direct Access SCSI-5 device da1: Serial Number WD-WCC4E2PTVTP9 da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) da1: quirks=0x8<4K> da2 at umass-sim0 bus 0 scbus6 target 0 lun 0 da2: <SanDisk Cruzer Fit 1.26> Fixed Direct Access SCSI-6 device da2: Serial Number 4C530010211031102164 da2: 40.000MB/s transfers da2: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C) da2: quirks=0x2<NO_6_BYTE> ada0 at ata2 bus 0 scbus1 target 1 lun 0 ada0: <WDC WD40EZRX-00SPEB0 80.00A80> ATA-9da3 at umass-sim1 bus 1 scbus7 target 0 lun 0 da3: <SanDisk Cruzer Fit 1.26> Fixed Direct Access SCSI-6 device da3: Serial Number 4C530009631031102243 da3: 40.000MB/s transfers da3: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C) da3: quirks=0x2<NO_6_BYTE> SATA 3.x device ada0: Serial Number WD-WCC4E3FE1ZJE ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad5 SMP: AP CPU #1 Launched! SMP: AP CPU #15 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #13 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #12 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #14 Launched! Timecounter "TSC" frequency 2133451724 Hz quality 1000 Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201412142326 []... GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) ipmi0: <IPMI System Interface> on acpi0 ipmi0: unknown resource type device_attach: ipmi0 attach returned 6 ichwd0 at port 0x830-0x837,0x860-0x87f on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 ipmi0: <IPMI System Interface> on isa0 ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa ipmi0: IPMI device rev. 1, firmware rev. 1.61, version 2.0 ipmi0: Number of channels 2 ipmi0: Attached watchdog vboxdrv: fAsync=0 offMin=0x2ba offMax=0x30af GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada0p1.eli destroyed. GEOM_ELI: Detached ada0p1.eli on last close. GEOM_ELI: Device da0p1.eli destroyed. GEOM_ELI: Detached da0p1.eli on last close. GEOM_ELI: Device da1p1.eli destroyed. GEOM_ELI: Detached da1p1.eli on last close. GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware
Debug/ixdiagnose attached.
FreeNAS version: FreeNAS 9.3.-STABLE-201412142326
Hardware: DELL C2100 - http://www.dell.com/us/business/p/poweredge-c2100/pd
Motherboard: Intel 5500
CPU: 2x L5630
RAM: 4x 8GB Samsung ECC... ill open it up and get the model if this is actually a ram issue
HD: 3x WD GREEN 4TB WD40EZRX. Single parity stripe
Add-On cards: PERC H200