Hi I have a problem, quite often my network goes down and after a few seconds it wakes up.
I don't know what the problem can be. Hope someone can help me.
Thanks for answer.
I don't know what the problem can be. Hope someone can help me.
Code:
Build FreeNAS-11.0-U1 (aa82cc58d) Platform Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz Memory 16225MB System Time Thu Jul 20 23:30:41 CEST 2017 Uptime 11:30PM up 1 day, 3:10, 0 users Load Average 0.34, 0.31, 0.23
Thanks for answer.
Code:
freenas.local kernel log messages: > em0: Watchdog timeout Queue[0]-- resetting > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 798, hw tdt = 805 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1016 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 340, hw rdt = 339 > em0: RX discarded packets = 0 > em0: RX Next to Check = 340 > em0: RX Next to Refresh = 339 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 899, hw tdt = 974 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 948 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 46, hw rdt = 45 > em0: RX discarded packets = 0 > em0: RX Next to Check = 46 > em0: RX Next to Refresh = 45 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 466, hw tdt = 522 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 967 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 21, hw rdt = 20 > em0: RX discarded packets = 0 > em0: RX Next to Check = 21 > em0: RX Next to Refresh = 20 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 1, hw tdt = 63 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 960 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 739, hw rdt = 738 > em0: RX discarded packets = 0 > em0: RX Next to Check = 740 > em0: RX Next to Refresh = 739 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 892, hw tdt = 932 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 982 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 834, hw rdt = 833 > em0: RX discarded packets = 0 > em0: RX Next to Check = 834 > em0: RX Next to Refresh = 833 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 12, hw tdt = 66 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 969 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 237, hw rdt = 236 > em0: RX discarded packets = 0 > em0: RX Next to Check = 237 > em0: RX Next to Refresh = 236 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 429, hw tdt = 497 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 955 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 896, hw rdt = 895 > em0: RX discarded packets = 0 > em0: RX Next to Check = 896 > em0: RX Next to Refresh = 895 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 574, hw tdt = 582 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1015 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 718, hw rdt = 717 > em0: RX discarded packets = 0 > em0: RX Next to Check = 719 > em0: RX Next to Refresh = 718 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 725, hw tdt = 773 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 975 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 504, hw rdt = 503 > em0: RX discarded packets = 0 > em0: RX Next to Check = 504 > em0: RX Next to Refresh = 503 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 737, hw tdt = 826 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 934 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 493, hw rdt = 492 > em0: RX discarded packets = 0 > em0: RX Next to Check = 493 > em0: RX Next to Refresh = 492 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 677, hw tdt = 691 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1009 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 525, hw rdt = 524 > em0: RX discarded packets = 0 > em0: RX Next to Check = 525 > em0: RX Next to Refresh = 524 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 136, hw tdt = 178 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 981 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 76, hw rdt = 75 > em0: RX discarded packets = 0 > em0: RX Next to Check = 76 > em0: RX Next to Refresh = 75 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 448, hw tdt = 494 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 976 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 264, hw rdt = 263 > em0: RX discarded packets = 0 > em0: RX Next to Check = 264 > em0: RX Next to Refresh = 263 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 137, hw tdt = 190 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 970 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 889, hw rdt = 888 > em0: RX discarded packets = 0 > em0: RX Next to Check = 889 > em0: RX Next to Refresh = 888 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 193, hw tdt = 246 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 970 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 27, hw rdt = 26 > em0: RX discarded packets = 0 > em0: RX Next to Check = 27 > em0: RX Next to Refresh = 26 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 426, hw tdt = 456 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 993 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 417, hw rdt = 416 > em0: RX discarded packets = 0 > em0: RX Next to Check = 417 > em0: RX Next to Refresh = 416 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 254, hw tdt = 316 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 960 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 368, hw rdt = 367 > em0: RX discarded packets = 0 > em0: RX Next to Check = 368 > em0: RX Next to Refresh = 367 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 898, hw tdt = 944 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 977 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 642, hw rdt = 641 > em0: RX discarded packets = 0 > em0: RX Next to Check = 642 > em0: RX Next to Refresh = 641 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 89, hw tdt = 110 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1002 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 728, hw rdt = 727 > em0: RX discarded packets = 0 > em0: RX Next to Check = 728 > em0: RX Next to Refresh = 727 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 913, hw tdt = 936 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 999 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 896, hw rdt = 895 > em0: RX discarded packets = 0 > em0: RX Next to Check = 896 > em0: RX Next to Refresh = 895 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 167, hw tdt = 207 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 982 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 341, hw rdt = 340 > em0: RX discarded packets = 0 > em0: RX Next to Check = 341 > em0: RX Next to Refresh = 340 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 626, hw tdt = 680 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 969 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 262, hw rdt = 261 > em0: RX discarded packets = 0 > em0: RX Next to Check = 262 > em0: RX Next to Refresh = 261 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 125, hw tdt = 152 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 996 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 613, hw rdt = 612 > em0: RX discarded packets = 0 > em0: RX Next to Check = 613 > em0: RX Next to Refresh = 612 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 140, hw tdt = 204 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 958 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 449, hw rdt = 448 > em0: RX discarded packets = 0 > em0: RX Next to Check = 449 > em0: RX Next to Refresh = 449 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 293, hw tdt = 303 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1012 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 839, hw rdt = 838 > em0: RX discarded packets = 0 > em0: RX Next to Check = 839 > em0: RX Next to Refresh = 838 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 583, hw tdt = 618 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 987 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 502, hw rdt = 501 > em0: RX discarded packets = 0 > em0: RX Next to Check = 502 > em0: RX Next to Refresh = 501 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 619, hw tdt = 644 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 997 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 661, hw rdt = 660 > em0: RX discarded packets = 0 > em0: RX Next to Check = 661 > em0: RX Next to Refresh = 660 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 777, hw tdt = 847 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 953 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 868, hw rdt = 867 > em0: RX discarded packets = 0 > em0: RX Next to Check = 868 > em0: RX Next to Refresh = 867 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 683, hw tdt = 726 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 979 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 506, hw rdt = 505 > em0: RX discarded packets = 0 > em0: RX Next to Check = 506 > em0: RX Next to Refresh = 505 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 552, hw tdt = 571 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 1003 > em0: Tx Descriptors avail failure = 24267856 > em0: RX Queue 0 ------ > em0: hw rdh = 1004, hw rdt = 1003 > em0: RX discarded packets = 0 > em0: RX Next to Check = 1004 > em0: RX Next to Refresh = 1003 > em0: link state changed to DOWN > em0: link state changed to UP > epair0a: link state changed to DOWN > epair0b: link state changed to DOWN > ifa_maintain_loopback_route: deletion failed for interface epair0b: 3 > em0: link state changed to DOWN > bridge0: can't disable some capabilities on em0: 0x1 > bridge0: link state changed to DOWN > em0: promiscuous mode disabled > ifa_maintain_loopback_route: deletion failed for interface lo0: 48 > em0: link state changed to UP > Waiting (max 60 seconds) for system process `vnlru' to stop... done > Waiting (max 60 seconds) for system process `bufdaemon' to stop... done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining... 0 0 0 0 0 done > All buffers synced. > Copyright (c) 1992-2017 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-STABLE #0 r313908+b3722b04944(freenas/ 11.0-stable): Sat Jul 1 02:44:49 UTC 2017 > root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64 > FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) > CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3400.09-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> > XSAVE Features=0x1<XSAVEOPT> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics > real memory = 17706254336 (16886 MB) > avail memory = 16468680704 (15705 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <ALASKA A M I> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. > ioapic0 <Version 2.0> irqs 0-23 on motherboard > random: entropy device external interface > kbd1 at kbdmux0 > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > nexus0 > cryptosoft0: <software crypto> on motherboard > aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard > padlock0: No ACE support. > acpi0: <ALASKA A M I> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > Event timer "HPET4" frequency 14318180 Hz quality 440 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pcib0: _OSC returned error 0x10 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 > pci2: <ACPI PCI bus> on pcib2 > mps0: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xf7ec0000-0xf7ec3fff,0xf7e80000-0xf7ebffff irq 17 at device 0.0 on pci2 > mps0: Firmware: 16.00.00.00, Driver: 21.01.00.00-fbsd > mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 > vgapci0: Boot video device > xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0 > xhci0: 32 bytes context size, 64-bit DMA > xhci0: Port routing mask set to 0xffffffff > usbus0 on xhci0 > pci0: <simple comms> at device 22.0 (no driver attached) > em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7f00000-0xf7f1ffff,0xf7f38000-0xf7f38fff irq 20 at device 25.0 on pci0 > em0: Using an MSI interrupt > em0: Ethernet address: 44:8a:5b:2f:86:6e > ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f37000-0xf7f373ff irq 16 at device 26.0 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > pci0: <multimedia, HDA> at device 27.0 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 > pci4: <ACPI PCI bus> on pcib4 > ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xf7d00000-0xf7d001ff irq 18 at device 0.0 on pci4 > ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported > ahci0: quirks=0xc00000<NOCCS,NOAUX> > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 > pci5: <ACPI PCI bus> on pcib5 > fwohci0: <1394 Open Host Controller Interface> port 0xc000-0xc0ff mem 0xf7c00000-0xf7c007ff irq 19 at device 0.0 on pci5 > fwohci0: OHCI version 1.10 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:10:dc:00:01:d3:f2:07 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: fwohci_intr_core: BUS reset > fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB > fwohci0: PhysicalUpperBound = 0x00000000 > fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode > ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f36000-0xf7f363ff irq 23 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci1: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7f35000-0xf7f357ff irq 19 at device 31.2 on pci0 > ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > acpi_button0: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > ichwd0: <Intel Panther Point watchdog timer> on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > coretemp2: <CPU On-Die Thermal Sensors> on cpu2 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > coretemp3: <CPU On-Die Thermal Sensors> on cpu3 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > freenas_sysctl: adding account. > freenas_sysctl: adding directoryservice. > firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) > firewire0: bus manager 0 > freenas_sysctl: adding middlewared. > freenas_sysctl: adding network. > freenas_sysctl: adding services. > ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled > nvme cam probe device init > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 480Mbps High Speed USB v2.0 > usbus2: 480Mbps High Speed USB v2.0 > ugen2.1: <Intel EHCI root HUB> at usbus2 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > ugen1.1: <Intel EHCI root HUB> at usbus1 > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > ugen0.1: <0x8086 XHCI root HUB> at usbus0 > uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > mps0: SAS Address for SATA device = d263463ad8c6c06e > mps0: SAS Address for SATA device = d2634538dac4b871 > mps0: SAS Address for SATA device = d2634538dac4b86f > mps0: SAS Address for SATA device = d2676658f6e2bc70 > mps0: SAS Address from SATA device = d263463ad8c6c06e > mps0: SAS Address from SATA device = d2634538dac4b871 > mps0: SAS Address from SATA device = d2634538dac4b86f > mps0: SAS Address from SATA device = d2676658f6e2bc70 > uhub2: 8 ports with 8 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub0: 2 ports with 2 removable, self powered > ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 > uhub3 on uhub1 > uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 > ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 > uhub4 on uhub0 > uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 > ugen0.2: <SanDisk Ultra> at usbus0 > umass0 on uhub2 > umass0: <SanDisk Ultra, class 0/0, rev 3.00/1.00, addr 1> on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x8100 > umass0:5:0: Attached to scbus5 > uhub3: 6 ports with 6 removable, self powered > uhub4: 8 ports with 8 removable, self powered > ugen1.3: <American Power Conversion Back-UPS RS 550G FW857.L4 .I USB FWL4> at usbus1 > ugen1.4: <SanDisk Ultra> at usbus1 > umass1 on uhub3 > umass1: <SanDisk Ultra, class 0/0, rev 2.10/1.00, addr 4> on usbus1 > umass1: SCSI over Bulk-Only; quirks = 0x8100 > umass1:6:1: Attached to scbus6 > da0 at mps0 bus 0 scbus0 target 0 lun 0 > da0: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device > da0: Serial Number WD-WMC4N1670491 > da0: 600.000MB/s transfers > da0: Command Queueing enabled > da0: 2861588MB (5860533168 512 byte sectors) > da0: quirks=0x8<4K> > da1 at mps0 bus 0 scbus0 target 1 lun 0 > da1: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device > da1: Serial Number WD-WMC4N1552214 > da1: 600.000MB/s transfers > da1: Command Queueing enabled > da1: 2861588MB (5860533168 512 byte sectors) > da1: quirks=0x8<4K> > da2 at mps0 bus 0 scbus0 target 2 lun 0 > da2: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device > da2: Serial Number WD-WMC4N1552212 > da2: 600.000MB/s transfers > da2: Command Queueing enabled > da2: 2861588MB (5860533168 512 byte sectors) > da2: quirks=0x8<4K> > da3 at mps0 bus 0 scbus0 target 4 lun 0 > da3: <ATA WDC WD30EFRX-68E 0A82> Fixed Direct Access SPC-4 SCSI device > da3: Serial Number WD-WCC4N5VUNZ53 > da3: 600.000MB/s transfers > da3: Command Queueing enabled > da3: 2861588MB (5860533168 512 byte sectors) > da3: quirks=0x8<4K> > da4 at umass-sim0 bus 0 scbus5 target 0 lun 0 > da4: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device > da4: Serial Number 4C531001460718114181 > da4: 400.000MB/s transfers > da4: 14875MB (30464000 512 byte sectors) > da4: quirks=0x2<NO_6_BYTE> > da5 at umass-sim1 bus 1 scbus6 target 0 lun 0 > da5: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device > da5: Serial Number 4C530001240719112095 > da5: 40.000MB/s transfers > da5: 14875MB (30464000 512 byte sectors) > da5: quirks=0x2<NO_6_BYTE> > random: unblocking device. > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > Timecounter "TSC-low" frequency 1700046758 Hz quality 1000 > Trying to mount root from zfs:freenas-boot/ROOT/11.0-U1 []... > GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) > hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> > em0: link state changed to UP > GEOM_ELI: Device da0p1.eli created. > GEOM_ELI: Encryption: AES-XTS 128 > GEOM_ELI: Crypto: hardware > GEOM_ELI: Device da1p1.eli created. > GEOM_ELI: Encryption: AES-XTS 128 > GEOM_ELI: Crypto: hardware > GEOM_ELI: Device da2p1.eli created. > GEOM_ELI: Encryption: AES-XTS 128 > GEOM_ELI: Crypto: hardware > GEOM_ELI: Device da3p1.eli created. > GEOM_ELI: Encryption: AES-XTS 128 > GEOM_ELI: Crypto: hardware > nfsd: can't register svc name > bridge0: Ethernet address: 02:15:28:25:90:00 > em0: promiscuous mode enabled > bridge0: link state changed to UP > epair0a: Ethernet address: 02:ff:e0:00:04:0a > epair0b: Ethernet address: 02:ff:30:00:05:0b > epair0a: link state changed to UP > epair0b: link state changed to UP > em0: link state changed to DOWN > epair0a: promiscuous mode enabled > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE > em0: TX Queue 0 ------ > em0: hw tdh = 288, hw tdt = 373 > em0: Tx Queue Status = -2147483648 > em0: TX descriptors avail = 938 > em0: Tx Descriptors avail failure = 720 > em0: RX Queue 0 ------ > em0: hw rdh = 821, hw rdt = 820 > em0: RX discarded packets = 0 > em0: RX Next to Check = 821 > em0: RX Next to Refresh = 820 > em0: link state changed to DOWN > em0: link state changed to UP > em0: Watchdog timeout Queue[0]-- resetting > Interface is RUNNING and ACTIVE -- End of security output --
