DEGRADED

ThePowerTool · Mar 18, 2014

FreeNAS-9.1.1-RELEASE-x86 (a752d35)

I'm getting an alert that "The volume raid3 (UFS) status is DEGRADED"

Volume Status sits on "Loading..."

Can someone please point me to a troubleshooting guide and maybe a few suggestions?

Thanks!

Yatti420 · Mar 18, 2014

Does the volume not load at all? UFS/x86 is about to be retired within FreeNAS.. 9.2.1.3 should be the final build..I don't use UFS but what is the output of "graid3 status". Aswell as "camcontrol devlist" Please post the output in code tags..

You should also be able to run "smartctl -q noserial -a /dev/ada#" for your disks to see smart values.. Please post these aswell..

More info on your general setup/hardware would be great..

Thanks,

ThePowerTool · Mar 18, 2014

I'm running an IBM zPro Server. I have a SCSI drive in it just for the FreeNAS code. I have 3 SATA2 drives (ad0-2) 3TB, each in a Raid3 configuration.

Here's my System Information
Hostname freenas.local
Build FreeNAS-9.1.1-RELEASE-x86 (a752d35)
Platform Intel(R) Xeon(TM) CPU 3.60GHz
Memory 3054MB
System Time Tue Mar 18 15:47:04 PDT 2014
Uptime 3:47PM up 9:34, 1 user
Load Average 0.11, 0.06, 0.04
Connected through 192.168.1.250

Please let me know what additional system information would be helpful.

Code:

~# graid3 status
      Name    Status  Components
raid3/raid3  DEGRADED  ada2 (ACTIVE)
                      ada1 (ACTIVE)

* ada0 is showing errors on console, FYI

Code:

~# camcontrol devlist

Code:

<ST3000DM001-1CH166 CC24>          at scbus1 target 0 lun 0 (ada0,pass0)
<ST3000DM001-1CH166 CC24>          at scbus2 target 0 lun 0 (ada1,pass1)
<ST3000DM001-1CH166 CC24>          at scbus3 target 0 lun 0 (ada2,pass2)
<HL-DT-ST DVDRAM GSA-4163B AX12>   at scbus5 target 0 lun 0 (cd0,pass3)
<HL-DT-ST DVDRAM GSA-4163B AX12>   at scbus5 target 1 lun 0 (cd1,pass4)
<WDC WD1600JS-00NCB1 10.02E02>     at scbus6 target 0 lun 0 (ada3,pass5)

Code:

~# smartctl -q noserial -a /dev/ada0
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda 7200.14 (AF)
Device Model:    ST3000DM001-1CH166
Firmware Version: CC24
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar 18 15:43:20 2014 PDT
 
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
 
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:        (  584) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (  1) minutes.
Extended self-test routine
recommended polling time:      ( 334) minutes.
Conveyance self-test routine
recommended polling time:      (  2) minutes.
SCT capabilities:            (0x3085)    SCT Status supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  111  099  006    Pre-fail  Always      -      30909728
  3 Spin_Up_Time            0x0003  095  093  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      84
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  065  060  030    Pre-fail  Always      -      68771892420
  9 Power_On_Hours          0x0032  092  092  000    Old_age  Always      -      7350
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      82
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      0 0 0
189 High_Fly_Writes        0x003a  100  100  000    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  074  056  045    Old_age  Always      -      26 (Min/Max 24/27)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      80
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      263
194 Temperature_Celsius    0x0022  026  044  000    Old_age  Always      -      26 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      8
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      8
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      7343h+58m+32.582s
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      7124171543
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      49681955116
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

~# smartctl -q noserial -a /dev/ada1
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda 7200.14 (AF)
Device Model:    ST3000DM001-1CH166
Firmware Version: CC24
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar 18 15:44:12 2014 PDT
 
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
 
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:        (  584) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (  1) minutes.
Extended self-test routine
recommended polling time:      ( 328) minutes.
Conveyance self-test routine
recommended polling time:      (  2) minutes.
SCT capabilities:            (0x3085)    SCT Status supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  119  099  006    Pre-fail  Always      -      217569344
  3 Spin_Up_Time            0x0003  094  093  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      79
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  077  060  030    Pre-fail  Always      -      4347955130
  9 Power_On_Hours          0x0032  092  092  000    Old_age  Always      -      7362
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      78
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      0 0 0
189 High_Fly_Writes        0x003a  060  060  000    Old_age  Always      -      40
190 Airflow_Temperature_Cel 0x0022  070  050  045    Old_age  Always      -      30 (Min/Max 29/30)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      75
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      155
194 Temperature_Celsius    0x0022  030  050  000    Old_age  Always      -      30 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      0
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      0
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      7356h+35m+04.521s
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      13011841339
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      44686721949
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Code:

~# smartctl -q noserial -a /dev/ada2
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda 7200.14 (AF)
Device Model:    ST3000DM001-1CH166
Firmware Version: CC24
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar 18 15:44:46 2014 PDT
 
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
 
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:        (  584) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (  1) minutes.
Extended self-test routine
recommended polling time:      ( 342) minutes.
Conveyance self-test routine
recommended polling time:      (  2) minutes.
SCT capabilities:            (0x3085)    SCT Status supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  119  100  006    Pre-fail  Always      -      210685456
  3 Spin_Up_Time            0x0003  094  093  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      94
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  066  052  030    Pre-fail  Always      -      38690012564
  9 Power_On_Hours          0x0032  092  092  000    Old_age  Always      -      7354
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      88
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      0 0 0
189 High_Fly_Writes        0x003a  084  084  000    Old_age  Always      -      16
190 Airflow_Temperature_Cel 0x0022  066  050  045    Old_age  Always      -      34 (Min/Max 33/34)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      90
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      197
194 Temperature_Celsius    0x0022  034  050  000    Old_age  Always      -      34 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      0
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      0
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      7347h+58m+28.226s
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      31609099285
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      5827655311
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[/FONT]

Yatti420 · Mar 18, 2014

Yep looks like ada0 is having problems.. The drives also looks like they need firmware updates.. http://forums.freenas.org/index.php?threads/updating-seagate-hard-drive-firmware.14561/

https://apps1.seagate.com/downloads/request.html

ThePowerTool · Mar 18, 2014

Quick question: Is it possible a firmware update will fix ada0?

I'll do the update on 1 and 2. I'm just wondering if I should RMA ada0 now or try the firmware update on it, first.

Thanks!

Yatti420 · Mar 18, 2014

Code:

197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      8
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      8

No it wont fix the errors.. You could run hard drive tools to run over every sector.. I still wouldn't trust it.. Is it under warranty? Maybe run a long smart test..

Edit: Infact I dont see smart tests for any drive.. Please run short/long tests on all drives..

Yatti420 · Mar 18, 2014

One of my drives..

Code:

smartctl -a -q noserial /dev/ada0
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda 7200.14 (AF)
Device Model:    ST2000DM001-9YN164
Firmware Version: CC4H
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar 18 21:19:23 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  575) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (  1) minutes.
Extended self-test routine
recommended polling time:        ( 224) minutes.
Conveyance self-test routine
recommended polling time:        (  2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  114  099  006    Pre-fail  Always      -      67686280
  3 Spin_Up_Time            0x0003  094  094  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      485
  5 Reallocated_Sector_Ct  0x0033  100  100  036    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  077  060  030    Pre-fail  Always      -      55102079
  9 Power_On_Hours          0x0032  088  088  000    Old_age  Always      -      11346
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      483
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      1 1 1
189 High_Fly_Writes        0x003a  100  100  000    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  068  059  045    Old_age  Always      -      32 (Min/Max 22/33)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      152
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      886
194 Temperature_Celsius    0x0022  032  041  000    Old_age  Always      -      32 (0 17 0 0 0)
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      0
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      0
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      11276h+43m+51.031s
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      97664739876341
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      147625516223056
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline      Completed without error      00%    11272        -
# 2  Extended offline    Completed without error      00%    11206        -
# 3  Short offline      Completed without error      00%    11156        -
# 4  Short offline      Completed without error      00%    11108        -
# 5  Short offline      Completed without error      00%    11061        -
# 6  Short offline      Completed without error      00%    11013        -
# 7  Short offline      Completed without error      00%    10965        -
# 8  Short offline      Completed without error      00%    10917        -
# 9  Extended offline    Completed without error      00%    10872        -
#10  Extended offline    Completed without error      00%    10722        -
#11  Extended offline    Completed without error      00%    10391        -
#12  Short offline      Completed without error      00%    10238        -
#13  Extended offline    Completed without error      00%    10103        -
#14  Short offline      Completed without error      00%      9984        -
#15  Extended offline    Completed without error      00%      9984        -
#16  Short offline      Completed without error      00%      9972        -
#17  Short offline      Completed without error      00%      9960        -
#18  Short offline      Completed without error      00%      9949        -
#19  Short offline      Completed without error      00%      9937        -
#20  Short offline      Completed without error      00%      9925        -
#21  Short offline      Completed without error      00%      9915        -
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ThePowerTool · Mar 19, 2014

OK I replaced the bad drive but it didn't automatically start rebuilding the array. In the past, and on older versions of FreeNAS when I replaced a bad drive this happened automatically. Am I doing something wrong?

Yatti420 · Mar 19, 2014

Did you replace according to the documentation? http://doc.freenas.org/index.php/Volumes#Replacing_a_Failed_Drive

Edit: I forgot you are using UFS.. I'm not sure on the replacement procedure here as I don't use it..

ThePowerTool · Mar 20, 2014

Hey, I'm very familiar with the documentation on replacing a failed drive and it starts with "if you are using ZFS" but then never gets to UFS.

I have done this before on older versions of FreeNAS and once the bad drive is replaced the RAID array would automatically rebuild.

When I replaced the bad drive I got a message that 2/3 drives were good and the status of the array was DEGRADED but then it said it couldn't determine the size of the array in the Size under View Volumes and there were no messages about the array being rebuilt--I'm not sure what to look for or how to troubleshoot.

I put the bad drive back in and the array comes up DEGRADED and I can access all of the data. I need some help, documenation, troubleshooting tips so I can replace the bad drive and get the array to rebuild.

ThePowerTool · Mar 20, 2014

Solved!

OK, I realize I'm probably the only person in the world left using UFS and RAID3. I'll be upgrading HW to move to ZFS Z3 hopefully in the very near future. Here's what happened:

When running RAID3 in FreeNAS and a drive fails replacing the drive should automatically insert the drive and start sync (rebuilding the array). For some reason on this version of FreeNAS (see 1st post, above), it didn't work as it has in previous versions. I have experience replacing drives under this exact circumstance in previous versions and that's what happened, each time.

References:
https://www.freebsd.org/doc/handbook/geom-graid.html
https://forums.freebsd.org/viewtopic.php?&t=11173

* and special thanks to the guys in #freebsd

All I had to do was manually insert the replaced drive. You will note the 2nd link under References matches up with my posted graid3 status (also above, in code tags):

Code:

graid3 insert raid3 ada0

Then I received confirmation:

Code:

[root@freenas] ~# graid3 status
Name         Status  Components
raid3/raid3  DEGRADED  ada2 (ACTIVE)
                       ada1 (ACTIVE)
                       ada0 (SYNCHRONIZING, 0%)

I think that speaks for itself.

Thank you for all of the help and support!

Important Announcement for the TrueNAS Community.

DEGRADED

ThePowerTool

Dabbler

Yatti420

Wizard

ThePowerTool

Dabbler

Yatti420

Wizard

ThePowerTool

Dabbler

Yatti420

Wizard

Yatti420

Wizard

ThePowerTool

Dabbler

Yatti420

Wizard

ThePowerTool

Dabbler

ThePowerTool

Dabbler

Similar threads

Important Announcement for the TrueNAS Community.

DEGRADED

Dabbler

Wizard

Dabbler

Wizard

Dabbler

Wizard

Wizard

Dabbler

Wizard

Dabbler

Dabbler

Important Announcement for the TrueNAS Community.

Related topics on forums.truenas.com for thread: "DEGRADED"

Similar threads