SOLVED Degraded pool! help

[ondjultomte]

It's not my day, the new server parts for my freenas build didn't pass POST, and now I got a degraded pool :( Probably because I was upgrading some parts and moving the chassi around and booting several times.

Im hoping its a problem with a sata cable and not a broken disc it self. How can I check that? dmesg gives

[root@freenas] ~# dmesg | grep HGST
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
[root@freenas] ~#

I'm missing da6 here , or a 6th disc.

Any tips or help is appreciated!!

 

[ondjultomte]

camcontrol devlist
<NECVMWar VMware IDE CDR10 1.00> at scbus1 target 0 lun 0 (cd0,pass0)
<VMware Virtual disk 1.0> at scbus2 target 0 lun 0 (pass1,da0)
<ATA HGST HDN724040AL A5E0> at scbus3 target 0 lun 0 (pass2,da1)
<ATA HGST HDN724040AL A5E0> at scbus3 target 1 lun 0 (pass3,da2)
<ATA HGST HDN724040AL A5E0> at scbus3 target 2 lun 0 (pass4,da3)
<ATA HGST HDN724040AL A5E0> at scbus3 target 3 lun 0 (pass5,da4)
<ATA HGST HDN724040AL A5E0> at scbus3 target 4 lun 0 (pass6,da5)
<ATA SAMSUNG HD204UI 0001> at scbus3 target 5 lun 0 (pass7,da6)
<ATA WDC WD30EZRX-00D 0A80> at scbus3 target 6 lun 0 (pass8,da7)
[root@freenas] ~#

seems that a disc isnt detected

 

[ondjultomte]

Ok, reseating cables back and forth and we are good to go.