2dfx
Cadet
- Joined
- Nov 16, 2020
- Messages
- 4
So after logging into my TrueNAS box today, I discovered this my result of smartctl -a on ada2:
...I would assume that ada2 is pooched. The odd thing is that the pool isn't listed as degraded...any idea why?
Just to make sure I have everything right, am I right in saying this is the procedure:
1. Offline the drive in FreeNAS, then shut down
2. Restart the machine, online the drive
3. Select 'replace drive' in the GUI, select it and wait for the re-silver
Am I missing anything? Thanks for the help!
Code:
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5
Device Model: ST10000DM0004-1ZC101
Serial Number: ZA2ARDS2
LU WWN Device Id: 5 000c50 0b5730512
Firmware Version: DN01
User Capacity: 10,000,831,348,736 bytes [10.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Dec 9 22:36:01 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 893) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 055 054 044 Pre-fail Always - 160370923
3 Spin_Up_Time 0x0003 089 089 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 28
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 1009
7 Seek_Error_Rate 0x000f 096 060 045 Pre-fail Always - 4254269109
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16692 (83 54 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 27
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 553
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 062 040 Old_age Always - 28 (Min/Max 25/30)
191 G-Sense_Error_Rate 0x0032 098 098 000 Old_age Always - 5116
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 170
194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 21 0 0 0)
195 Hardware_ECC_Recovered 0x001a 032 001 000 Old_age Always - 160370923
197 Current_Pending_Sector 0x0012 099 096 000 Old_age Always - 951
198 Offline_Uncorrectable 0x0010 099 096 000 Old_age Offline - 951
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16673h+12m+20.325s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 26707962502
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 47106578234
SMART Error Log Version: 1
ATA Error Count: 553 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 553 occurred at disk power-on lifetime: 16692 hours (695 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 ff ff ff 4f 00 3d+08:05:09.705 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:09.670 READ LOG EXT
60 00 01 ff ff ff 4f 00 3d+08:05:07.472 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:07.462 READ LOG EXT
60 00 01 ff ff ff 4f 00 3d+08:05:05.256 READ FPDMA QUEUED
Error 552 occurred at disk power-on lifetime: 16692 hours (695 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 ff ff ff 4f 00 3d+08:05:07.472 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:07.462 READ LOG EXT
60 00 01 ff ff ff 4f 00 3d+08:05:05.256 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:05.221 READ LOG EXT
61 00 08 ff ff ff 4f 00 3d+08:05:02.981 WRITE FPDMA QUEUED
Error 551 occurred at disk power-on lifetime: 16692 hours (695 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 ff ff ff 4f 00 3d+08:05:05.256 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:05.221 READ LOG EXT
61 00 08 ff ff ff 4f 00 3d+08:05:02.981 WRITE FPDMA QUEUED
60 00 01 ff ff ff 4f 00 3d+08:05:02.981 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:02.971 READ LOG EXT
Error 550 occurred at disk power-on lifetime: 16692 hours (695 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 ff ff ff 4f 00 3d+08:05:02.981 WRITE FPDMA QUEUED
60 00 01 ff ff ff 4f 00 3d+08:05:02.981 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 3d+08:05:02.971 READ LOG EXT
61 00 08 ff ff ff 4f 00 3d+08:05:00.745 WRITE FPDMA QUEUED
61 00 10 ff ff ff 4f 00 3d+08:05:00.743 WRITE FPDMA QUEUED
Error 549 occurred at disk power-on lifetime: 16692 hours (695 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 ff ff ff 4f 00 3d+08:05:00.745 WRITE FPDMA QUEUED
61 00 10 ff ff ff 4f 00 3d+08:05:00.743 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 3d+08:05:00.743 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 3d+08:05:00.743 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 3d+08:05:00.743 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 10% 16575 -
# 2 Short offline Completed without error 00% 16407 -
# 3 Short offline Completed without error 00% 16239 -
# 4 Short offline Completed without error 00% 16071 -
# 5 Short offline Completed without error 00% 15903 -
# 6 Short offline Completed without error 00% 15735 -
# 7 Short offline Completed without error 00% 15567 -
# 8 Short offline Completed without error 00% 15399 -
# 9 Short offline Completed without error 00% 15231 -
#10 Short offline Completed without error 00% 15063 -
#11 Short offline Completed without error 00% 14895 -
#12 Short offline Completed without error 00% 14727 -
#13 Short offline Completed without error 00% 14559 -
#14 Short offline Completed without error 00% 14392 -
#15 Short offline Completed without error 00% 14224 -
#16 Short offline Completed without error 00% 14056 -
#17 Short offline Completed without error 00% 13888 -
#18 Short offline Completed without error 00% 13720 -
#19 Short offline Completed without error 00% 13552 -
#20 Short offline Completed without error 00% 13384 -
#21 Short offline Completed without error 00% 13216 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing...I would assume that ada2 is pooched. The odd thing is that the pool isn't listed as degraded...any idea why?
Just to make sure I have everything right, am I right in saying this is the procedure:
1. Offline the drive in FreeNAS, then shut down
2. Restart the machine, online the drive
3. Select 'replace drive' in the GUI, select it and wait for the re-silver
Am I missing anything? Thanks for the help!
