Minseok Choi
Cadet
- Joined
- Jul 23, 2014
- Messages
- 1
FreeNAS version : 9.2.16 x64
CPU : Intel E3-1200
RAM : 16GiB
M/B : Supermicro X10SLM-F
RAID : On-board(Intel C224 Express PCH)
My system has four repository disks. They have been created two RAID1 volumes by On-board RAID controller such as the below.
DISK1+DISK2 = Volume1
DISK3+DISK4 = Volume2
So, I expected the volumes show under the FreeNAS but it just shows four disks such as below figure.
Please let me know what I should do.
Thank you.
CPU : Intel E3-1200
RAM : 16GiB
M/B : Supermicro X10SLM-F
RAID : On-board(Intel C224 Express PCH)
My system has four repository disks. They have been created two RAID1 volumes by On-board RAID controller such as the below.
DISK1+DISK2 = Volume1
DISK3+DISK4 = Volume2
So, I expected the volumes show under the FreeNAS but it just shows four disks such as below figure.
Please let me know what I should do.
Thank you.