secdoc
Cadet
- Joined
- Sep 22, 2023
- Messages
- 1
All - I currently have the current configuration:
eno1 would be on 192.168.30.0/24
eno2 would be on 192.168.2.0/24
I want to have TruNAS connect to separate VLANs to help improve performance and minimize default gateway traffic. Each NIC would be associated with a different Network, so it would not be both on a single network. Each time I try to configure the second NIC to another Network, the TrueNAS front end reboots and have to use the IPMI to remove the config and default back to the primary NIC config. I want to essentially have the connectivity to two VLANs since that is where a majority of the traffic will be from.
Any thoughts on this?
Code:
Overview Platform: TRUENAS-MINI-3.0-X+ Version: TrueNAS-SCALE-22.12.3.3 NIC: 2 x Media Subtype: 10000Mb/s Twisted Pair
eno1 would be on 192.168.30.0/24
eno2 would be on 192.168.2.0/24
I want to have TruNAS connect to separate VLANs to help improve performance and minimize default gateway traffic. Each NIC would be associated with a different Network, so it would not be both on a single network. Each time I try to configure the second NIC to another Network, the TrueNAS front end reboots and have to use the IPMI to remove the config and default back to the primary NIC config. I want to essentially have the connectivity to two VLANs since that is where a majority of the traffic will be from.
Any thoughts on this?